Dynamic Analysis of Wind Turbine Gearbox Components
نویسندگان
چکیده
Abstract: This paper studies the dynamic response of a wind turbine gearbox under different excitation conditions. The proposed 4 degree-of-freedom (DOF) dynamic model takes into account the key factors such as the time-varying mesh stiffness, bearing stiffness, damping, static transmission error and gear backlash. Both the external excitation due to wind and the internal excitation due to the static transmission error are included to represent the gearbox excitation conditions. With the help of the time history and frequency spectrum, the dynamic responses of wind turbine gearbox components are investigated by using the numerical integration method. This paper explains under which conditions the fretting corrosion, as one of the wind turbine gearbox failure modes, may occur. Furthermore, it is observed that the external excitation fluctuation has large influence on the dynamic responses of both the gears and bearings.
منابع مشابه
Condition Monitoring of a Wind Turbine Gearbox using the Empirical Mode Decomposition Method and Outlier Analysis
Wind turbines are subject to variable aerodynamic loads and extreme environmental conditions. Wind turbine components fail frequently, resulting in high maintenance costs. For this reason, gearbox condition monitoring becomes important since gearboxes are among the wind turbine components with the most frequent failure observations. The major challenge here is the detection of faults under the ...
متن کاملGearbox Fault Detection Nrel Gearbox Test Facility
the winD inDustry has experienceD a rapid expansion. As wind farms are aging, their operations and maintenance issues are gaining in significance. The wind industry has been affected by failures of wind turbine components such as main bearings, gearboxes, and generators. Replacement of failed components results in the high cost in energy production. Therefore, research in fault identification a...
متن کاملJoint High-Order Synchrosqueezing Transform and Multi-Taper Empirical Wavelet Transform for Fault Diagnosis of Wind Turbine Planetary Gearbox under Nonstationary Conditions
Wind turbines usually operate under nonstationary conditions, such as wide-range speed fluctuation and time-varying load. Its critical component, the planetary gearbox, is prone to malfunction or failure, which leads to downtime and repair costs. Therefore, fault diagnosis and condition monitoring for the planetary gearbox in wind turbines is a vital research topic. Meanwhile, the signals measu...
متن کاملAnalysis of Wind Turbine Blade Vibration and Drivetrain Loads
ANALYSIS OF WIND TURBINE BLADE VIBRATION AND DRIVETRAIN LOADS By Venkatanarayanan Ramakrishnan The reliability of wind turbines is a major issue for the industry. Drivetrain and blade failures are common, costly and not fully understood. Designers must thus examine and understand the key parameters that influence reliability. As wind turbines increase in size, the blades are designed to be more...
متن کاملOperational Modal Analysis of Wind Turbine Speed- increase Gearbox
Speed increase transmission gear box is the primary vibration and noise source of wind turbine, Operational modal method was adopted to collect impact data and response data of each point based on the gearbox test model. ANSYS finite element model is established to simulate the wind turbine gearbox. Then the modal frequencies of the two methods were compared to ensure the test model is correct....
متن کامل