Newton-Raphson State Estimation Solution Employing Systematically Constructed Jacobian Matrix

نویسندگان

  • Nursyarizal Mohd Nor
  • Ramiah Jegatheesan
  • Perumal Nallagownden
چکیده

Newton-Raphson State Estimation method using bus admittance matrix remains as an efficient and most popular method to estimate the state variables. Elements of Jacobian matrix are computed from standard expressions which lack physical significance. In this paper, elements of the state estimation Jacobian matrix are obtained considering the power flow measurements in the network elements. These elements are processed one-by-one and the Jacobian matrix H is updated suitably in a simple manner. The constructed Jacobian matrix H is integrated with Weight Least Square method to estimate the state variables. The suggested procedure is successfully tested on IEEE standard systems. Keywords—State Estimation (SE), Weight Least Square (WLS), Newton-Raphson State Estimation (NRSE), Jacobian matrix H.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Efficient Method for Solving the Direct Kinematics of Parallel Manipulators Following a Trajectory

This paper presents an efficient method for solving the direct kinematics of parallel manipulators that follow a defined singularity-free trajectory. Despite the main problem is to solve the inverse kinematics, calculating the errors between the desired path and the actual path requires solving the forward kinematics which is a challenging problem. The proposed method combines closed-loop Jacob...

متن کامل

Heat and Mass Balance Using Constraint Equations, a Spreadsheet, and the Newton-raphson Technique

To work out a balance problem in a factory, two simple rules are applied. Firstly, a steady state condition applies. This gives rise to the second rule: what goes in must come out. Based on these rules, the equations for heat and mass balances can be derived. There are several packages available to solve these rules or constraints. The choices include Simulink and Sugars. The use of these packa...

متن کامل

Implementation of the Newton-Raphson and Admittance Methods for EIT

Electrical Impedance Tomography (EIT) is an imaging technique which aims to the reconstruction of the spatial electrical conductivity distribution of a section of the human body. In this paper, in order to solve the EIT forward and inverse problems, a finite difference approach to the solution of Maxwell’s equations, namely the admittance method, and the Newton-Raphson algorithm have been emplo...

متن کامل

Modified Newton-raphson Load Flow Analysis for Integrated Ac/dc Power Systems

The significant increase in planned offshore wind parks and the tendency towards large parks in considerable distances offshore, make the well established HVDC technology a favorable solution for the connection of these large & distant offshore wind parks to the main power grid onshore. It is therefore necessary to adequately model the HVDC transmission links and integrate them in the load flow...

متن کامل

Sparse LU Decomposition using FPGA

This paper reports on an FPGA implementation of sparse LU decomposition. The resulting special purpose hardware is geared towards power system problems load flow computation which are typically solved iteratively using Newton Raphson. The key step in this process, which takes approximately 85% of the computation time, is the solution of sparse linear systems arising from the Jacobian matrices t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009