Elastic-plastic Analytical Solutions of Deformation of Uplift Belled Pile

نویسندگان

  • W. J. Yao
  • S. P. Chen
چکیده

Original scientific paper In this paper, based on the overlapping deformation mode of load transfer law of uplift belled pile, and the theory of elastic mechanics, the elastic-plastic analytical solutions of uplift belled pile were derived, and the nonlinear elastic-plastic deformation analysis method was established, which made the deformation analysis theory of uplift belled pile more reasonable. The deformation analysis method of uplift belled pile was extended to uplift pile with change location expanding body (CLEB), which was carried out the deformation analysis of uplift pile under the complex load conditions conveniently. The deformation analytical solutions derived in this paper were simpler, avoid unit division of pile and tedious numerical calculation. Through the comparison between test results and results of theoretical calculation, it was shown that the elastic-plastic analytical solutions were close to the field test results. The elastic-plastic method in this paper provided a reference for engineering design of uplift belled pile. The method established in this paper could calculate the load-deformation relationship of uplift belled pile which has high level of bearing capacity, so it has important role to reduce or partially replace the field loading test work. Finally, the method was used to analyse the main factors of uplift belled pile of affecting the deformation character of the uplift belled pile.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

2d Model Study on Slip Surface around Belled Anchor Pile under Uplift in Cohesionless Soil

The belled anchor pile has proficient application in the field of geotechnical engineering as because its enlarged base can bear more compressive loads and large volume of breakout soil within slip surface move upward under tension. The bell anchor pile can be used in case of on-land and off-shore structures where there is a threat to overturning of structures due to external tension loads. The...

متن کامل

Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation

Finite element modeling has been used to study the development of surface deformation during indentation with a Vickers indenter. A wide range of materials with different elastic modulus and yield stresses are examined. Results show that in a pyramidal indentation process, for a perfectly plastic material, sinking-in during loading can change to pile-up in unloading. This phenomenon depends on ...

متن کامل

A Semi-analytical Approach to Elastic-plastic Stress Analysis of FGM Pressure Vessels

An analytical method for predicting elastic–plastic stress distribution in a cylindrical pressure vessel has been presented. The vessel material was a ceramic/metal functionally graded material, i.e. a particle–reinforcement composite. It was assumed that the material’s plastic deformation follows an isotropic strain-hardening rule based on the von-Mises yield criterion, and that the vessel was...

متن کامل

Elastic/plastic Buckling Analysis of Skew Thin Plates based on Incremental and Deformation Theories of Plasticity using Generalized Differential Quadrature Method

Abstract   In this study, generalized differential quadrature analysis of elastic/plastic buckling of skew thin plates is presented. The governing equations are derived for the first time based on the incremental and deformation theories of plasticity and classical plate theory (CPT). The elastic/plastic behavior of plates is described by the Ramberg-Osgood model. The ranges of plate geometries...

متن کامل

A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate

In this paper to predict the critical conditions for onset of elastic-plastic wrinkling of flange of a two-layered circular blank during the deep-drawing process a closed-form semi-analytical elastic-plastic solution using Tresca yield criterion alongwith deformation theory in plasticity with considernig the perfectly plastic behaviour of materials is presented. Simplifying the presented soluti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014