A Study on Rock Mass Classifications and Tunnel Support Systems in Unconsolidated Sedimentary Rock
نویسندگان
چکیده
This paper presents new valuable field data and a comprehensive approach to the determination of the rock mass classification and tunnel support systems for tunnels in unconsolidated sedimentary rocks as a special soil condition. The main objective of this study is to investigate and present the characteristics of the unconsolidated sedimentary rock by using the point load tests and slake durability tests. In addition, the appropriate rock mass classification and tunnel support system for the unconsolidated sedimentary rock tunnel are proposed, based on the results of experimental tests. The proposed rock mass classification and tunnel support system are validated through comparison against results from measuring the convergence of a tunnel under the construction. The proposed tunnel support system is appropriate for the unconsolidated sedimentary rocks, since the convergence factors, such as the maximum displacement and velocity of displacement, satisfy the criteria.
منابع مشابه
Effects of statistical distribution of joint trace length on the stability of tunnel excavated in jointed rock mass
The rock masses in a construction site of underground cavern are generally not continuous, due to the presence of discontinuities, such as bedding, joints, faults, and fractures. The performance of an underground cavern is principally ruled by the mechanical behaviors of the discontinuities in the vicinity of the cavern. During underground excavation, many surrounding rock failures have close r...
متن کاملCalculation of tunnel behavior in viscoelastic rock mass
Wall displacements and ground pressure acting on the lining of a tunnel increase with time. These time-dependent deformations are both due to face advance effect and to the time-dependent behavior of the rock mass. Viscoelastic materials exhibit both viscous and elastic behaviors. Thorough this study, the effect of different linear viscoelastic models including Maxwell, Kelvin and Kelvin-Voigt...
متن کاملSelection of Optimum Tunnel Support System Using Aggregated Ranking of SAW, TOPSIS and LA Methods
The selection of optimum support system is a key step in the successful design operation of tunneling, rock mass stabilization and minimization of plastic zone extension around a tunnel. In this context, it is not sufficient to rely only on the experiences of design engineers, but taking all effective measures and parameters is necessary to do a proper choice. In this paper, multi attribute dec...
متن کاملEvaluation of TBM Utilization Using Rock Mass Rating System: A Case Study of Karaj-Tehran Water Conveyance Tunnel (Lots 1 and 2)
Successful application of a TBM in a project requires investigating both the ground conditions and the machine and backup system design features. Prediction of the machine performance is very important as it has a big effect on the duration of the project and the costs. In this respect, both penetration rate and advance rate must be estimated. Utilization factor, which depends on the type of op...
متن کاملPredicting three-dimensional displacement around the tunnel and its impact on the value of Q-system
Having knowledge of stability of an underground space depends on stresses and strains around it. Creating underground tunnels leads to significant changes in the rock mass stress. Therefore, to achieve the necessary stability, stresses and deformations around the tunnel must be examined carefully. Usually, stress-strain behavior analysis is conducted in two-dimensional mode. This paper was cond...
متن کامل