Comparison of polyvinyl chloride and elastic stannum stylet extraction forces with various lubricants: a simulation study
نویسندگان
چکیده
BACKGROUND Stylets are the most frequently used devices for tracheal intubation, but can be a source of postoperative pharyngeal pain or hoarseness. In this study, we evaluated extraction forces between polyvinyl chloride (PVC) and stannum (Sn) stylets with various lubricants. FINDINGS Using a manikin, we compared extraction forces between PVC and Sn stylets under four different conditions: without lubricant, 3 ml of water (water), three sprays of 8 % lidocaine (lidocaine), and olive oil. A force measuring device was used to accurately measure the extraction force for stylet removal. The extraction force was significantly smaller with the Sn stylet compared to the PVC stylet, regardless of the lubricant used for all three tracheal tubes with different diameters tested (P < 0.05). In comparisons by lubricant, lidocaine and olive oil resulted in significantly lower extraction forces than with no lubricant or water with the PVC stylet for all tracheal tubes tested. In contrast, there were no significant differences in extraction force by lubricant for the Sn stylet across all tracheal tubes tested. CONCLUSIONS The Sn stylet required less extraction force compared to the PVC stylet, regardless of the lubricant used.
منابع مشابه
Compression coil provides increased lead control in extraction procedures.
AIMS We investigated a new lead extraction tool (Compression Coil; One-Tie, Cook Medical) in an experimental traction force study. METHODS AND RESULTS On 13 pacemaker leads (Setrox JS53, Biotronik) traction force testing was performed under different configurations. The leads were assigned to three groups: (i) traction force testing without central locking stylet support (n = 5), (ii) tractio...
متن کاملIntroducing a novel Polyvinyl chloride/Tungsten composites for shielding against gamma and X-ray radiations
Introduction: This study introduces a novel polyvinyl chloride (PVC)/tungsten composites with characterization of their shielding properties by employing different techniques. Methods: The PVC/tungsten composites were produced by employing various weight fractions of tungsten micro-particles including 0, 20, and 40 % wt via melt blending method. In the next st...
متن کاملProtective effect of vitamin E on sperm quality and in vitro fertilizing potential and testosterone concentration in polyvinyl chloride treated Male rats
Polyvinyl chloride (PVC) has toxic effects through the induction of oxidative stress in the body and testicles. Vitamin E (Vit E) is a dietary compound that functions as an antioxidant scavenging toxic free radicals. The present study aimed to probe the protective effect of Vit E against PVC-induced reprotoxicity in male rats. In this experimental study, 24 male rats were randomly divided into ...
متن کاملMolecular Dynamics Investigation of The Elastic Constants and Moduli of Single Walled Carbon Nanotubes
Determination of the mechanical properties of carbon nanotubes is an essential step in their applications from macroscopic composites to nano-electro-mechanical systems. In this paper we report the results of a series of molecular dynamics simulations carried out to predict the elastic constants, i.e. the elements of the stiffness tensor, and the elastic moduli, namely the Young’s and shear mod...
متن کاملImproving patient safety by design -- a new spinal/intrathecal injection safety system.
readily be achieved with the inverted insertion (i.e., with the concave surface facing backward) of a polyvinyl chloride endotracheal tube.2 They attributed their success, in part, to the more anatomic direction of the tube on emergence from the Fastrach laryngeal mask airway with the inverted tube insertion technique. A similar “hang up” is often seen during tracheal intubation using the Bulla...
متن کامل