Development of a Bending Fatigue Testing Method for Rings from a CVT-Pushbelt
نویسنده
چکیده
Fatigue tests are a very time consuming process in engineering, in which also a lot of energy is required. Speeding up fatigue tests and making them less energy consuming, would lead to major profits. The aim of this study is to obtain these profits by the development of a new bending fatigue test. In addition, the objective is to apply this new method to the bending fatigue test of rings from a CVT-Pushbelt. A new bending fatigue testing method is developed and is successfully applied to the bending fatigue test of the CVTpushbelt rings. The new method makes use of spring capabilities of the ring for displacement amplification via resonance. A concept model is created with which tests are done to validate the new method. It is concluded that the speed is increased by almost 60% and the energy requirement is reduced by 95%. Tests until specimen failure show similar results as current tests, while the conditions of the fatigue test remain the same.
منابع مشابه
Assessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملApplication of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission
Among different goals defined in vehicle design process, fuel consumption (FC) is one of the most important objectives, which significantly has taken into account lately, both by the customers and vehicle manufacturers. One of the significant parameters which impacts the vehicle FC is the efficiency of vehicle's power train. In this paper, a half-toroidal continuously variable transmission (CVT...
متن کاملMediating Role of Chronic Fatigue in the Relationship Between Psychological Characteristics and Aggression of Police Officers in Tabriz: Development and Testing of a Structural Model
Background and Aim: Personnel of the sheriff's departments as human resources, due to the inherent characteristics of the military profession, are faced with numerous occupational problems and as a result are exposed to greater psychological vulnerability than those of other occupations. The purpose of this study was to investigate the relationship between psychological characteristics of depre...
متن کاملDegree of Bending (DoB) in Tubular KT-Joints of Jacket Structures Subjected to Axial Loads
The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...
متن کاملEvaluating the Semi-Circular Bending Test for HMA Mixtures
Semi-Circular Bending (SCB) Test is a fast and accurate three-point bending test, which was originally used in rock mechanics. SCB test is going to be an accepted test method for asphalt concrete pavements. Different asphalt-mixture property-values such as tensile strength, stress intensity factor and fatigue can be obtained by this test. In this study, static and dynamic tests including SCB te...
متن کامل