The virtual model of the prosthetic tibial components.
نویسندگان
چکیده
The paper presents a method of study and the steps to obtain the virtual tibial component of the human knee joint prosthesis. For that purpose CAD parametric software was used which allows the construction of a high definition model. The obtained 3D model was studied using the finite element method and the stress and displacements distribution was obtained for different solicitations of the prosthetic and non-prosthetic tibial component of the virtual knee joint.
منابع مشابه
Effects of malalignment angle on the contact stress of knee prosthesis components, using finite element method.
In this paper, the complex 3D virtual model of the prosthetic knee is obtained using embedded applications: DesignModeler and SpaceClaim under ANSYS Workbench 14.5 software package. A number of six cases of prosthetic knee joint assembly, depending on the malalignment angle, are developed. Stress maps and the values of the maximum von Mises stress on the three prosthesis components: polyethylen...
متن کاملNumerical Simulations of 3D Model of Knee-prosthesis Assembly with Antero-posterior Tibial Slope
In this paper, starting from the virtual model of the human knee joint, and existent knee prosthesis, often used in total knee arthroplasty, we developed 3D models of all prosthetic components. The study investigates the effects of antero-posterior tibial slope on contact stresses in all components of total knee prosthesis using finite element analysis. Using AnsysWorkbench15.07 software, the s...
متن کاملDetermining Components of Medical Instructional Design based on Virtual Reality by Research Synthesis
Introduction: The purpose of the present study was to determine the components of medical education design based on virtual reality by research synthesis method. Methods: In the present study a synthesis method was used. In order to study the research background and to collect appropriate data among the databases of Science Direct, Springer, Scopus, ProQuest and Eric (ERIC) search. With the ke...
متن کامل75% success rate after open debridement, exchange of tibial insert, and antibiotics in knee prosthetic joint infections
BACKGROUND AND PURPOSE Prosthetic joint infection (PJI) is a leading cause of early revision after total knee arthroplasty (TKA). Open debridement with exchange of tibial insert allows treatment of infection with retention of fixed components. We investigated the success rate of this procedure in the treatment of knee PJIs in a nationwide material, and determined whether the results were affect...
متن کاملتعیین شرایط تمرینی بهینه برای تقویت انتخابی عضله پهن داخلی مایل نسبت به عضله پهن خارجی با استفاده از مدل‌سازی عضلانی اسکلتی
Objective: The purpose of this study is to find the optimum training conditions for selective strengthening of the vastus medialis oblique muscle over vastus lateralis. Methods: For this purpose, a musculoskeletal model of lower limb was developed by OpenSim software. Using a detailed tibiofemoral and patellofemoral joint modeling and six muscular branches for components of quadriceps femori...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Romanian journal of morphology and embryology = Revue roumaine de morphologie et embryologie
دوره 47 4 شماره
صفحات -
تاریخ انتشار 2006