CuH-ZSM-5 as hydrocarbon trap under cold start conditions.
نویسندگان
چکیده
Cold start tests are carried out to evaluate the performance of copper-exchanged zeolites as hydrocarbon traps under simulated gasoline car exhaust gases, paying special attention to the role of copper in the performance of these zeolites. It is concluded that the partial substitution of the protons in the parent H-ZSM-5 zeolite is highly beneficial for hydrocarbon trapping due to the formation of selective adsorption sites with specific affinity for the different exhaust components. However, it is also observed that uncontrolled exchanging process conditions could lead to the presence of CuO nanoparticles in the zeolite surface, which seem to block the pore structure of the zeolite, decreasing the hydrocarbon trap efficiency. Among all the zeolites studied, the results point out that a CuH-ZSM-5 with a partial substitution of extra-framework protons by copper cations and without any detectable surface CuO nanoparticles is the zeolite that showed the best performance under simulated cold start conditions due to both the high stability and the hydrocarbon retaining capacity of this sample during the consecutive cycles.
منابع مشابه
Strategies to Enhance the Catalytic Performance of ZSM-5 Zeolite in Hydrocarbon Cracking: A Review
ZSM-5 zeolite is widely used in catalytic cracking of hydrocarbon, but the conventional ZSM-5 zeolite deactivates quickly due to its simple microporous and long diffusion pathway. Many studies have been done to overcome these disadvantages recently. In this review, four main approaches for enhancing the catalytic performance, namely synthesis of ZSM-5 zeolite with special morphology, hierarchic...
متن کاملThe Variety of Carbon-Metal Bonds inside Cu-ZSM-5 Zeolites: A Density Functional Theory Study
Large-scale density functional theory calculations (DFT) found various types of binding of an unsaturated hydrocarbon (C2H2 and C2H4) to a ZSM-5 zeolite extraframework copper cation. We employed the DFT calculations based on the B3LYP functional to obtain local minima of an unsaturated hydrocarbon adsorbed on one or two copper cations embedded inside ZSM-5, and then compared their stabilization...
متن کاملHeterobimetallic Zeolite, InV-ZSM-5, Enables Efficient Conversion of Biomass Derived Ethanol to Renewable Hydrocarbons
Direct catalytic conversion of ethanol to hydrocarbon blend-stock can increase biofuels use in current vehicles beyond the ethanol blend-wall of 10-15%. Literature reports describe quantitative conversion of ethanol over zeolite catalysts but high C2 hydrocarbon formation renders this approach unsuitable for commercialization. Furthermore, the prior mechanistic studies suggested that ethanol co...
متن کاملOptimal Cold-Start Control of a Gasoline Engine
This article analyzes the influence of the ignition retardation on the fuel consumption, the cumulative tailpipe hydrocarbon emissions, and the temperature inside the three-way catalytic converter in a gasoline direct injection engine operated under idling conditions. A dedicated cylinder-individual, model-based, multivariable controller was used in experiments in order to isolate the effect of...
متن کاملTailoring ZSM-5 Zeolites for the Fast Pyrolysis of Biomass to Aromatic Hydrocarbons.
The production of aromatic hydrocarbons from cellulose by zeolite-catalyzed fast pyrolysis involves a complex reaction network sensitive to the zeolite structure, crystallinity, elemental composition, porosity, and acidity. The interplay of these parameters under the reaction conditions represents a major roadblock that has hampered significant improvement in catalyst design for over a decade. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Environmental science & technology
دوره 47 11 شماره
صفحات -
تاریخ انتشار 2013