Polygon Slot Microstrip Antenna Design for Next Generation Wireless System
نویسندگان
چکیده
w w w . i j e c t . o r g 204 InternatIonal Journal of electronIcs & communIcatIon technology Abstract This paper describes a polygon slot Microstrip antenna design for next generation wireless system. The triple-band operation is obtained by embedding asymmetrical pairs of polygon shaped slots. With the continuous growth of wireless communication service and the constant miniaturization of communication equipment, there are higher and higher demands for the volume of antennas, integration and working band..The return loss of -30.92, -21.1 and -25.85dB is obtained at 11.36, 15.11 and 20.5 GHz respectively. Details of the proposed antenna design are presented and discussed, which can be a candidate for the requirement of next generation wireless system.
منابع مشابه
Superconducting Microstrip-Fed Antenna Coupled to a Microwave Kinetic Inductance Detector
A proper antenna to couple to a microstrip Microwave Kinetic Inductance Detector (MKID) is designed and simulated. A twin-slot microstrip-fed inline antenna is designed for frequency band of 600-720~GHz integrated with an elliptical lens and coupled to the MKID. A systematic design procedure for design of such antenna with microstrip inline feeding is presented. Whole structure of lens and twin...
متن کاملDevelopment of A Compact and Low Profile Cavity Backed Slot Antenna Using Microstrip Gap Waveguide Technology
Proof of concept of a cavity backed slot antenna based on inverted microstrip gap waveguide (IMGW) technology is presented. Since the antenna is operating based on the first resonating mode of the cavity, it is more compact compared to the ordinary cavity backed slot antennas in which the second cavity mode is used for radiation. Furthermore, the proposed antenna element introduces lower lo...
متن کاملA Novel Broadband Design of a Printed Rectangular Slot Antenna for Wireless Applications
width of 77 percent for a 2:1 VSWR. However, the impedance bandwidth of this antenna design is still not enough to cover most wireless applications. It is important to enhance the impedance bandwidth of microstrip-fed wideslot antennas. In this article, a novel design of a microstrip-fed, printed rectangular slot antenna, with a small trapezoidal slot tuning for wireless applications, is propos...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملSlot Loaded Microstrip Antenna for GPS , Wi - Fi , and WiMAX Applications Survey
A tri-band slot loaded microstrip antenna is proposed. The tri-band characteristics of antenna are achieved by incorporating a combination of symmetrical Y-shaped and asymmetrical U-shaped slot. The Y-shaped slot is placed symmetrically where as U-shaped slot is placed asymmetrically to the center of the patch to achieve the desired tri-band characteristics. The return loss characteristics show...
متن کامل