Front propagation at the onset of plastic yielding.
نویسندگان
چکیده
The existence of a finite threshold, the yield stress, for the onset of plastic yielding is a universal feature of plasticity. This jamming-unjamming transition is naturally accounted for by the dynamics of a bistable internal state field. We show, within the athermal shear transformation zone theory of amorphous plasticity, that the transition is accompanied by the propagation of plastic fronts. We further show that the mean-field theory cannot select the velocity of these fronts, and go beyond the mean-field description to include fluctuations and correlations effects, resulting in additional nonlocal terms in the equations. Finally, we demonstrate that these terms, with an associated intrinsic length scale, provide a velocity selection mechanism for the plastic fronts.
منابع مشابه
An investigation into finding the optimum combination for dental restorations
The aim of the study was to find the optimum combination of materials and thicknesses to provide a tough, damage resistant multi-layer system with numerical methods to restore the damaged teeth. Extended Finite Element Method (XFEM) was used to assess the critical loads for the onset of damage modes such as radial cracks and plastic deformation in dental prostheses, which consist of a brittle o...
متن کاملThe Onset of Plastic Yielding in a Spherical Shell Compressed by a Rigid Flat
The onset of plastic yielding in a spherical shell loaded by a rigid flat is analyzed using finite element analysis. The effect of spherical shell geometry and material properties on the critical normal load, critical interference, and critical contact area, at the onset of plastic yielding, is investigated and the location where plastic yielding first occurs is determined. A universal dimensio...
متن کاملElasto-plastic solution for thick-walled spherical vessels with an inner FGM layer
Purely elastic, partially and fully plastic stress states in a thick-walled spherical pressure vessel with an inner functionally graded material (FG) coating subjected to internal and external pressures are developed analytically in this paper. The modulus of elasticity and the uniaxial yield limit of the FG coating layer are considered to vary nonlinearly through the thickness. Using Tresca’s ...
متن کاملAn Efficient In Vitro Propagation, Antioxidant and Antimicrobial Activities of Aphyllorchis Montana (Reichenb.f.)
An in vitro plant regeneration protocol was successfully established in Aphyllorchis Montana , a saprophytic achlorophyllous orchid by culturing immature seeds. Among the six basal media evaluated for seed germination, BM-TM medium was found to be the best followed by KC medium. After 40 days, all the media turned brown and the growths of the protocorms were arrested. Activated charcoal, 1 g/l ...
متن کاملEffect of Stress Triaxiality on Yielding of Anisotropic Materials under Plane Stress Condition
The triaxiality of the stress state is known to greatly influence the amount of plastic strain which a material may undergo before ductile failure occurs. It is defined as the ratio of hydrostatic pressure, or mean stress, to the von Mises equivalent stress. This paper discusses the effects of stress triaxiality on yielding behavior of anisotropic materials. Hill-von Mises’s criteria for anisot...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 78 2 Pt 2 شماره
صفحات -
تاریخ انتشار 2008