Accuracy and reproducibility of 3D digital tooth preparations made by gypsum materials of various colors

نویسندگان

  • Fa-Bing Tan
  • Chao Wang
  • Hong-Wei Dai
  • Yu-Bo Fan
  • Jin-Lin Song
چکیده

PURPOSE The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach. MATERIALS AND METHODS A titanium maxillary first molar preparation was created as reference dataset (REF). Silicone impressions were duplicated from REF and randomized into 6 groups (n=8). Gypsum preparations were formed and grouped according to the color of gypsum materials, and light-scanned to obtain prepared datasets (PRE). Then, in terms of accuracy, PRE were superimposed on REF using the best-fit-algorithm and PRE underwent intragroup pairwise best-fit alignment for assessing reproducibility. Root mean square deviation (RMSD) and degrees of similarity (DS) were computed and analyzed with SPSS 20.0 statistical software (α=.05). RESULTS In terms of accuracy, PREs in 3D directions were increased in the 6 color groups (from 19.38 to 20.88 µm), of which the marginal and internal variations ranged 51.36 - 58.26 µm and 18.33 - 20.04 µm, respectively. On the other hand, RMSD value and DS-scores did not show significant differences among groups. Regarding reproducibility, both RMSD and DS-scores showed statistically significant differences among groups, while RMSD values of the 6 color groups were less than 5 µm, of which blue color group was the smallest (3.27 ± 0.24 µm) and white color group was the largest (4.24 ± 0.36 µm). These results were consistent with the DS data. CONCLUSION The 3D volume of the PREs was predisposed towards an increase during digitalization, which was unaffected by gypsum color. Furthermore, the reproducibility of digitalizing scanning differed negligibly among different gypsum colors, especially in comparison to clinically observed discrepancies.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Qualitative and quantitative three-dimensional accuracy of a single tooth captured by elastomeric impression materials: an in vitro study.

STATEMENT OF PROBLEM The accuracy of impressions has been described in 1 or 2 dimensions, whereas it is most desirable to evaluate the accuracy of impressions spatially, in 3 dimensions. PURPOSE The purpose of this study was to demonstrate the accuracy and reproducibility of a 3-dimensional (3-D) approach to assessing impression preciseness and to quantitatively comparing the occlusal correct...

متن کامل

Accuracy of intraoral and extraoral digital data acquisition for dental restorations

UNLABELLED The computer-aided design (CAD) and computer-aided manufacturing (CAM) process chain for dental restorations starts with taking an impression of the clinical situation. For this purpose, either extraoral digitization of gypsum models or intraoral digitization can be used. Despite the increasing use of dental digitizing systems, there are only few studies on their accuracy. OBJECTIV...

متن کامل

In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques

PURPOSE The aim of this study was to evaluate and compare the inter-operator reproducibility of three-dimensional (3D) images of teeth captured by a digital impression technique to a conventional impression technique in vivo. MATERIALS AND METHODS Twelve participants with complete natural dentition were included in this study. A digital impression of the mandibular molars of these participant...

متن کامل

Comparative evaluation of few physical properties of epoxy resin, resin-modified gypsum and conventional type IV gypsum die materials: an in vitro study.

AIM To compare and evaluate few physical properties of epoxy resin, resin-modified gypsum and conventional type-IV gypsum die material. MATERIALS AND METHODS In the present study, dimensional accuracy, surface detail reproduction and transverse strength of three die materials like epoxy resin (Diemet-E), resin-modified gypsum (Synarock) and conventional type-IV gypsum (Ultrarock) are analyzed...

متن کامل

بررسی فراوانی رنگ دندان سانترال ماگزیلا با دو نوع نمونه رنگ در مراجعه‌کنندگان به بخش پروتزهای دندانی دانشکده دندانپزشکی بابل

Introduction: Knowing the color distribution of natural teeth and as a result the availability of the dentures teeth with the required colors is essential for patients. Therefore, the aim of this study was to compare the color of natural teeth by two shade guides, Vita tooth guide 3D-Master and Vitapan Classical, in patients referring to prosthodontics department of Babol dental school in 2013...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2018