Figuring the shape of the electron
ثبت نشده
چکیده
microrobot with a gas combustion mechanism and buoyant outriggers. These design components stabilized the microrobot, overcoming the water’s surface tension to allow take-off. A surfactant coating enabled diving, and a flapping-wing configuration provided functional propulsion for both air and water environments. The microrobot could land on an elastic surface, hover in air, submerge into water, and swim. —RLK Sci. Robot. 2, eaao5619 (2017).
منابع مشابه
Development of focusing mirror for X-ray free electron laser (Reprint from Proceedigns of ISUPEN2011)
We describe the fabrication of a long mirror for focusing hard X-rays to nanometer dimension. We established the figuring system with an accuracy of nanometer-level for X-ray mirror optics. Electrolytic in-process dressing grinding is used for first-step figuring and elastic emission machining is employed for final figuring and surface smoothing. The focusing mirror has an elliptical curved sha...
متن کاملDevelopment of an Accommodation-Dependent Eye Model and Studying the Effects of Accommodation on Electron and Proton Dose Conversion Coefficients
Introduction International Commission on Radiological Protection (ICRP) has provided a comprehensive discussion on threshold dose for radiation-induced cataract in ICRP publication 116. Accordingly, various parts of the eye lens have different radio-sensitivities. Recently, some studies have been performed to develop a realistic eye model with the aim of providing accurate estimation of fluence...
متن کاملFabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel
Stent is a metal mesh tube for opening the obstructed vessels of the body. Ni-Ti alloy is a suitable metal for fabrication of stent due to its potential for applying the appropriate stress and strain to the vessel walls. In this study, super-elastic Nitinol wire was used to build stent samples usable to open femoral vessel. Ageing was performed at 500°C for different periods of time to determin...
متن کاملIon-beam machining of millimeter scale optics.
An ion-beam microcontouring process is developed and implemented for figuring millimeter scale optics. Ion figuring is a noncontact machining technique in which a beam of high-energy ions is directed toward a target substrate to remove material in a predetermined and controlled fashion. Owing to this noncontact mode of material removal, problems associated with tool wear and edge effects, which...
متن کاملStudy of the Shape Controlling Silver Nanoplates by Reduction Process
In this work, we report synthesis of silver nanoplates by a simple reduction process of silver nitrate in the presence of polyvinyl alcohol (PVA) and N,N'-dimethyl formamide (DMF). The Characterization of the samples were carried out using X-ray diffraction (XRD), Transmission-electron microscopy (TEM) and UV-vis spectroscopy. Absorption spectra of the nanoplates in comparison with that of the ...
متن کامل