A new lower limit for the ultimate breaking strain of carbon nanotubes.

نویسندگان

  • Chia-Chi Chang
  • I-Kai Hsu
  • Mehmet Aykol
  • Wei-Hsuan Hung
  • Chun-Chung Chen
  • Stephen B Cronin
چکیده

We apply immense strain to ultralong, suspended, single-walled carbon nanotubes while monitoring their Raman spectra. We can achieve strains up to 13.7 ± 0.3% without slippage, breakage, or defect formation based on the observation of reversible change in Raman spectra. This is more than twice that of previous observations. The rate of G band downshift with strain is found to span a wide range from -6.2 to -23.6 cm(-1)/% strain. Under these immense strains, the G band is observed to downshift by up to 157 cm(-1) (from 1592 to 1435 cm(-1)). Interestingly, under these significant lattice distortions, we observe no detectable D band Raman intensity. Also, we do not observe any broadening of the G band line width until a threshold downshift of Δω(G) > 75 cm(-1) is achieved at high strains, beyond which the fwhm of the G band increases sharply and reversibly. On the basis of a theoretical nonlinear stress-strain response, we estimate the maximum applied stress of the nanotubes in this study to be 99 GPa with a strength-to-weight ratio of almost 74,000 kN x m/kg, which is 30 times that of Kevlar and 117 times that of steel.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تأثیر عیب استون- ولز بر استحکام نهایی نانولوله‏های کربنی

In this study, a three-dimensional finite element (FE) model for armchair, zigzag and chiral single-walled carbon nanotubes (SWCNTs) is proposed. To create the FE models, nodes are placed at the locations of carbon atoms and the bonds between them are modeled using three-dimensional elastic beam elements. The FE model is used to investigate the influence of chirality and Stone-Wales defects on ...

متن کامل

Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties

In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...

متن کامل

Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites

This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...

متن کامل

Ultimate strength of carbon nanotubes: A theoretical study

The ultimate strength of carbon nanotubes is investigated by large-scale quantum calculations. While the formation energy of strain-induced topological defects determines the thermodynamic limits of the elastic response and of mechanical resistance to applied tension, it is found that the activation barriers for the formation of such defects are much larger than estimated previously. The theore...

متن کامل

Voltammetric Determination of Penicillamine Using a Carbon Paste Electrode Modified with Multiwall Carbon Nanotubes In the Presence of Methyldopa as a Mediator

A multiwall carbon nanotubes-modified carbon paste electrode (MWCNTs/MCPE) wasfabricated and used to study the electrooxidation of penicillamine (PA) by electrochemicalmethods in the presence of methyldopa (MDOP) as a homogeneous mediator. Theelectrochemical oxidation of PA on the new sensor has been carefully studied. The kineticparameters such as electron transfer coefficient, α, and catalyti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS nano

دوره 4 9  شماره 

صفحات  -

تاریخ انتشار 2010