Vertical or Horizontal Transport? - Comparison of robotic storage and retrieval systems

Autonomous vehicle-based storage and retrieval systems are commonly used in e-commerce fulfillment as they allow a high and flexible throughput capacity. In these systems, roaming robots transport loads between a storage location and a workstation. Two main variants exist: Horizontal, where the robots only move horizontally and use lifts for vertical transport and a new variant Vertical, where the robots can also travel vertically in the rack. This paper builds a framework to analyze the performance of the vertical system and to compare its throughput capacity with the horizontal system. We build closed-queueing network models for this that in turn are used to optimize the design. The results show that the optimal height-to-width ratio of a vertical system is around 1. As a large number of system robots may lead to blocking and delays, we compare the effect of two different robot blocking protocols on the system throughput: robot Recirculation and Wait-On-Spot. The Wait-On-Spot policy produces a higher system throughput when the number of robots in the system is small. However, for a large number of robots in the system, the Recirculation policy dominates the Wait-On-Spot policy. Finally, we compare the operational costs of the vertical and the horizontal transport system. For systems with one load/unload (L/U) point, the vertical system always produces a similar or higher system throughput, with a lower operating cost compared to the horizontal system with a discrete lift. It also outperforms the horizontal system with a continuous lift in systems with two L/U points.