Impact of Geometric Variability on Axial Compressor Performance
نویسندگان
چکیده
A probabilistic methodology to quantify the impact of geometric variability on compressor aerodynamic performance is presented. High-fidelity probabilistic models of geometric variability are derived using a principal-component analysis of blade surface measurements. This probabilistic blade geometry model is then combined with a compressible, viscous blade-passage analysis to estimate the impact on the passage loss and turning using a Monte Carlo simulation. Finally, a mean-line multistage compressor model, with probabilistic loss and turning models from the blade-passage analysis, is developed to quantify the impact of the blade variability on overall compressor efficiency and pressure ratio. The methodology is applied to a flank-milled integrally bladed rotor. Results demonstrate that overall compressor efficiency can be reduced by approximately 1% due to blade-passage effects arising from representative manufacturing variability. @DOI: 10.1115/1.1622715#
منابع مشابه
Probabilistic Aerothermal Design of Compressor Airfoils
Despite the generally accepted notion that geometric variability is undesirable in turbomachinery airfoils, little is known in detail about its impact on aerothermal compressor performance. In this work, statistical and probabilistic techniques were used to assess the impact of geometric and operating condition uncertainty on axial compressor performance. High-fidelity models of geometric varia...
متن کاملEffect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance
The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...
متن کاملPerformance Modeling and Examination of Losses in the Axial -Flow Compressor and Comparisonwith Experimental Results
The performance prediction of axial flow compressors at different speeds and under various pressure ratio conditions are still being developed because of costly empirical experiments. One-dimensional modeling is a simple, fast and accurate method for performance prediction in any type of compressor with different geometries. In this approach, inlet flow conditions and compressor geometry are kn...
متن کاملPerformance Prediction Modeling of Axial-Flow Compressor by Flow Equations
Design models of multi- stage, axial flow compressor are developed for gas turbine engines. Axial flow compressor is one of the most important parts of gas turbine units. Therefore, its design and performance prediction are very important. One-dimensional modeling is a simple, fast and accurate method for performance prediction of any type of compressors with different geometries. In this appro...
متن کاملOne-Dimensional design of a three-stage axial compressor with Its 3D numerical simulation
The purpose of this study is to design a three-stage axial compressor with identical pressure ratio which makes an adequate pressure ratio and efficiency in design point conditions with rotational velocity of 38000rpm and mass flow rate of 3.2kg/s. First of all, considering some restrictions such as Dehaller number more than 0.7 in all sections of the stator and the rotor, and relative Mach num...
متن کامل