Elevated Temperature Anodized Nb<sub>2</sub>O<sub>5</sub>: A Photoanode Material with Exceptionally Large Photoconversion Efficiencies

نویسندگان

  • Jian Zhen Ou
  • Rozina A. Rani
  • Moon-Ho Ham
  • Matthew R. Field
  • Yuan Zhang
  • Haidong Zheng
  • Peter Reece
  • Serge Zhuiykov
  • Sharath Sriram
  • Madhu Bhaskaran
  • Richard B. Kaner
چکیده

Jian Zhen Ou,* Rozina A. Rani, Moon-Ho Ham, Matthew R. Field, Yuan Zhang, Haidong Zheng, Peter Reece, ) Serge Zhuiykov, Sharath Sriram, Madhu Bhaskaran, Richard B. Kaner, and Kourosh Kalantar-zadeh* School of Electrical and Computer Engineering, RMIT University, Melbourne, VIC, Australia, Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States, School of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju, Korea, School of Applied Science, RMIT University, Melbourne, VIC, Australia, School of Physics, University of New South Wales, Sydney, New South Wales, Australia, Materials Science and Engineering Division, CSIRO, Highett, Victoria, Australia, and Department of Materials Science and Engineering, University of California, Los Angeles, California 90095, United States

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrodeposited Co-Pi Catalyst on α-Fe2O3 Photoanode for Water-Splitting Applications

Optoelectronic properties of hematite (α-Fe2O3) as a photoanode and the required over-potential in photo-assisted water splitting has been improved by presence of Co-Pi on its surface. In order to increase the lifetime of the photogenerated holes and lower the applied bias, cobalt-phosphate (Co-Pi) on nanostructured α-Fe2O3 by electrodeposition was de...

متن کامل

Microwave-Hydrothermal Synthesis and Characterization of High-Purity Nb Doped BaTiO3 Nanocrystals

The synthesis of Nb doped BaTiO3 has been investigated under Microwave-Hydrothermal (MH) conditions in the temperature of 150°C for only 2 h using C16H36O4Ti, BaH2O2.8H2O and NbCl5 as Ba, Ti and  Nb sources, respectively.  Typical experiments performed on MH processing have not yet reported for Nb doped BaTi...

متن کامل

The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite

In this paper the feasibility of NbAl3/Al2O3 nanocomposite formation through mechanochemical reaction between Al and Nb2O5 and the effect of mechanical activation on the kinetic and reaction mechanism were investigated. Structural and phase evolution during mechanical alloying were studied by employing transmission electron microscopy (TEM)...

متن کامل

Convectional hydrothermal synthesis of high-purity pesudo-cubic BaTi0.09Nb0.01O3 nanocrystals in rotary autoclave

Nano-sized BaTiO3 powders with particular Nb concentrations were prepared by Rotary- Hydrothermal (RH) method. Hydrothermal method was used at 180 °C for 5 hours with new Ti pressure and the teflon vessel was rotated at a speed of 160 rpm during the hydrothermal reaction. New hydrothermal method was used instead of previous solid state reaction for the system BaTiO3±Nb<sub...

متن کامل

Convectional hydrothermal synthesis of high-purity pesudo-cubic BaTi0.09Nb0.01O3 nanocrystals in rotary autoclave

Nano-sized BaTiO3 powders with particular Nb concentrations were prepared by Rotary- Hydrothermal (RH) method. Hydrothermal method was used at 180 °C for 5 hours with new Ti pressure and the teflon vessel was rotated at a speed of 160 rpm during the hydrothermal reaction. New hydrothermal method was used instead of previous solid state reaction for the system BaTiO3±Nb<sub...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012