Facile control of long range orientation in mesoporous carbon films with thermal zone annealing velocity.

نویسندگان

  • Jiachen Xue
  • Gurpreet Singh
  • Zhe Qiang
  • Kevin G Yager
  • Alamgir Karim
  • Bryan D Vogt
چکیده

Ordered mesoporous carbons exhibit appealing properties for many applications, but their function and performance can depend critically on their structure. The in-plane orientation of 2D cylinders from the cooperative assembly of Pluronic P123 and resol has been controlled by application of cold zone annealing (CZA). By varying the moving rate, the preferential in-plane orientation of the self-assembled cylinders can be tuned through the entire 180° range possible from ϕ = 50° to ϕ = -130° (relative to the moving direction). At a moving rate of 2 μm s(-1), this simple and easy CZA process leads to cylinders that are well aligned parallel to the moving direction with a high orientational factor of S = 0.98. Moreover, the in-plane oriented cylinders can be nearly perfectly aligned transverse to the moving direction (S = 0.95) by simply decreasing the moving velocity to 0.5 μm s(-1). We attribute the parallel alignment to the flow that develops from the motion of the thermal gradients, while the transverse alignment is related to flow cessation (inertial effect). The preferential orientation is retained through the carbonization process, but there is some degradation in orientation due to insufficient crosslinking of the resol during CZA; this effect is most prominent for the higher moving rates (less time for crosslinking), but can be overcome by post-CZA annealing at uniform elevated temperatures to further crosslink the resol. CZA is a simple and powerful method for fabricating well-aligned and self-assembled mesoporous carbon films over large areas.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Unidirectional self-assembly of soft templated mesoporous carbons by zone annealing.

Surfactant or block copolymer-templated mesoporous films have been extensively explored, but achieving mesostructure coherence and unidirectional orientation over macroscopic dimensions has remained quite challenging for these self-assembled systems. Here, we extend the concepts associated with zone refinement of crystalline materials to soft templated mesoporous carbon films based on the coope...

متن کامل

Thermal Annealing Influence over Optical Properties of Thermally Evaporated SnS/CdS Bilayer Thin Films

Thin films of tin sulfide/cadmium sulfide (SnS/CdS) were prepared bythermal evaporation method at room temperature on a glass substrate and then annealedat different temperature with the aim of optimizing the optical properties of the materialfor use in photovoltaic solar cell devices. The effect of annealing on optical propertiesof SnS/CdS film was studied in the temper...

متن کامل

Unidirectional alignment of block copolymer templated porous films using solvent vapor annealing with soft shear ZHE

Submitted for the MAR14 Meeting of The American Physical Society Unidirectional alignment of block copolymer templated porous films using solvent vapor annealing with soft shear ZHE QIANG, KEVIN CAVICCHI, BRYAN VOGT, The University of Akron — Porous films templated by block copolymers (BCPs) have been extensively investigated due to their potential numerous applications such as sorbents and nan...

متن کامل

Long-range ordered thin films of block copolymers prepared by zone-casting and their thermal conversion into ordered nanostructured carbon.

Large-scale alignment of lamellae in thin films of diblock copolymers containing polyacrylonitrile and poly(n-butyl acrylate) was achieved by casting copolymer solution on a silicon substrate moved away at a constant speed from the casting nozzle (zone-casting). Grazing incidence small-angle X-ray scattering revealed that the lamellae, which were perpendicular to the substrate, were also aligne...

متن کامل

An Efficient Route to Mesoporous Silica Films with Perpendicular Nanochannels

The fabrication of mesoporous silica films with well-defined morphologies offers tremendous opportunity for device structures. In particular the generation of a mesoporous silica film with cylindrical nanochannels of prescribed diameters oriented normal to the substrate holds great promise for applications in catalysis, bio-molecular separations, sensors, photonics, synthesis of aligned metalli...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 5 24  شماره 

صفحات  -

تاریخ انتشار 2013