Identification of the diamond-like B-C phase by confocal Raman spectroscopy.
نویسندگان
چکیده
The new diamond-like B-C phase was obtained from the graphite-like BC phase in a laser-heated diamond anvil cell at high temperature 2230+/-140 K and high pressure 45 GPa. Raman spectra of the new phase measured at ambient conditions revealed a peak at 1315 cm(-1), which was attributed to longitudinal-optical (LO) mode. The X-Y Raman mapping was used to investigate spatial distribution of the diamond-like phases and was shown to be a powerful tool in studying the sp(2)-to-sp(3) phase transformations occurring in the diamond cell under high temperature and high pressure.
منابع مشابه
Effect of Catalyst on the Growth of Diamond-like Carbon by HFCVD
Diamond like carbon (DLC) film was grown by hot filament chemical vapor deposition (HFCVD)technique. In the present work, we investigated the quality of the DLC films groew on the substratesthat were coated with various metal nanocatalysts (Au and Ni). A combination of CH4/Ar/H2 rendersthe growth of carbon nanostructures technique (diamond like carbon). The utilized samples werecharacterized by...
متن کاملLaser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film
Laser micro-Raman spectroscopy is an ideal tool for assessment and characterization of various types of carbon-based materials. Due to its special optical properties (CrN) coated stainless steel substrates. NCD films have been investigated by laser micro-Raman spectroscopy. The fingerprint of diamond based materials is in the spectral region of 1000-1600 cm-1 in the first order of Raman scatter...
متن کاملEffect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition
This study, investigates the effect of bias voltage on structural changes of diamond-like carbon thin film created by ion beam deposition is investigated. For this purpose, the bias voltage in the values of 0 V, -50 V, -100 V and -150 V on the AA5083 aluminum alloy was considered. Raman spectroscopy was used to evaluate structural. Influence of the bias voltage on the thickness and roughness of...
متن کاملThe Growth of Diamond-like Carbon Nano-Structures: Investigation of the Affecting Factors
Using DC-Plasma Enhanced Chemical Vapour Deposition (PECVD) system, the impact of pure Co onthe growth of diamond-like carbon (DLC) nano-structures were investigated. In this study, Acetylene(C2H2) was diluted in H2 and used as the reaction gas and Cobalt (Co) nano-particles were used asthe catalyst. The effect of preparing Co catalyst at temperatures of 240°C and 350°C and growthconditions was...
متن کاملMorphological Characterization of Combustion Deposited Diamond Crystals and Films
Single crystals and polycrystalline diamond films of several thicknesses were deposited using oxygen/acetylene combustion flame technique. The substrate used was pure polycrystalline molybdenum subjected to mechanical polishing. Quality and microstructural characteristic of diamond produced were investigated using X-Ray diffraction, Raman Spectroscopy, Scanning and Transmission Electron Microsc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy
دوره 61 10 شماره
صفحات -
تاریخ انتشار 2005