A parametric feature-based CAD system for reproducing traditional pierced jewellery
نویسندگان
چکیده
In this paper, we introduce ByzantineCAD, a parametric CAD system for the design of pierced medieval jewellery, which is jewellery created by piercing, a traditional Byzantine technique. ByzantineCAD is an automated parametric system where the design of a piece of jewellery is expressed by a collection of parameters and constraints and the user’s participation in the design process is through the definition of the parameter values. We present an approach to designing traditional pierced jewellery using a voxel-oriented feature-based Computer Aided Design paradigm: a large complex pierced design is created by appropriately placing elementary structural elements. We also present a scaling algorithm for enlarging pierced designs without altering the size of the elementary structural elements used to construct them.
منابع مشابه
A Parametric Feature-based CAD System for Reproducing Traditional Jewelry
We introduce an automated parametric CAD system for the design of pierced medieval jewellery, where the design of a piece of jewellery is expressed by a collection of parameters and constraints and the user’s participation in the design process is through the definition of parameter values. We present an approach to designing traditional pierced jewellery using a voxel-oriented feature-based Co...
متن کاملCAD/CAM Methods for Reverse Engineering: A Case study of Reengineering Jewellery
Reverse engineering, the process of obtaining a geometric CAD model from measurements obtained by scanning an existing physical model, is widely used in numerous applications, such as manufacturing, industrial design and jewellery design and reproduction. For each application domain we characterize the suitability of various solid models appropriate for CAD. For creating editable CAD models mea...
متن کاملAn Investigation of Integrating Design by Features and Feature Recognition
1 Currently with HKS 2 Corresponding author ([email protected]) ABSTRACT Feature technology has been evolving since the early 1980s, yet is still found in few commercial CAD systems. Traditional CAD systems provide support for geometric design and limited parametric design. Two basic approaches to feature modeling have been developed: design by features and feature recognition. Each of these me...
متن کاملساختار دهی آنی دادههای مکانی ورودی GIS با تأکید بر عارضه راه
An important issue in implementation of a GIS system is preparation of data to be entered in GIS. To produce spatial data for GIS using photogrammetric techniques, conventional method is to apply photogrammetric and GIS systems individually (off-line procedure). This approach is costly, time consuming and somehow unreliable due to the fact that 3D photogrammetric model is not available at the ...
متن کاملBody piercing in the accident and emergency department.
Recently an increasing number of patients with complications related to pierced body jewellery have been seen. Often removal of the jewellery is indicated. Removal of these items may also be required for radiological purposes. If the doctor is familiar with the opening mechanism of the item, removal is not usually difficult. Uninformed attempts at removal may cause unnecessary trauma and distre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Computer-Aided Design
دوره 37 شماره
صفحات -
تاریخ انتشار 2005