Reduction in hydrogen outgassing from stainless steels by a medium-temperature heat treatment
نویسندگان
چکیده
منابع مشابه
Afrl-rx-wp-ja-2017-0165 Laser Surface Melting of Stainless Steel Anodes for Reduced Hydrogen Outgassing (postprint)
Anodes of 304 stainless steel have been processed by a continuous wave Yb fiber laser with a wavelength of 1.064 lm and subjected to 50 keV electron bombardment in order to determine the extent to which hydrogen outgassing is reduced by the laser surface melting treatment. The results show a reduction in outgassing, by approximately a factor of four compared to that from untreated stainless ste...
متن کاملApplication of Polymeric Quenchants in Heat Treatment of Steels
Aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. By adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. In this work, Polyalkylene Glycol (PAG) aqueous solution was used as th...
متن کاملInfluence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...
متن کاملSuper Plasticity of /α Duplex Stainless Steels
In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...
متن کاملMicrostructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
Dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. In this study, X53CrMnNiN219 (austenitic stainless steel) and X45CrSi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. The welded joint was then heat treated at 760 0C for 60 min. Mechanical prop...
متن کامل