Performance of SU-8 Membrane Suitable for Deep X-Ray Grayscale Lithography

نویسنده

  • Harutaka Mekaru
چکیده

In combination with tapered-trench-etching of Si and SU-8 photoresist, a grayscale mask for deep X-ray lithography was fabricated and passed a 10-times-exposure test. The performance of the X-ray grayscale mask was evaluated using the TERAS synchrotron radiation facility at the National Institute of Advanced Industrial Science and Technology (AIST). Although the SU-8 before photo-curing has been evaluated as a negative-tone photoresist for ultraviolet (UV) and X-ray lithographies, the characteristic of the SU-8 after photo-curing has not been investigated. A polymethyl methacrylate (PMMA) sheet was irradiated by a synchrotron radiation through an X-ray mask, and relationships between the dose energy and exposure depth, and between the dose energy and dimensional transition, were investigated. Using such a technique, the shape of a 26-μm-high Si absorber was transformed into the shape of a PMMA microneedle with a height of 76 μm, and done with a high contrast. Although during the fabrication process of the X-ray mask a 100-μm-pattern-pitch (by design) was enlarged to 120 μm. However, with an increase in an integrated dose energy this number decreased to 99 μm. These results show that the X-ray grayscale mask has many practical applications. In this paper, the author reports on the evaluation results of SU-8 when used as a membrane material for an X-ray mask.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Ultra Thick, Ultra High Aspect Ratio Microcomponents by Deep and Ultra Deep X-Ray Lithography

Two advanced processes have been developed for fabricating ultra thick and ultra high aspect ratio (HAR) microstructures. One is the SU-8 based deep x-ray lithography (SU-8 based DXRL) process which uses the normal deep x-ray beam to expose the negative SU-8 resist. Another one is wave length shifter(WLS) based Ultra deep x-ray lithography (WLS-UDXRL) process which uses special ultra deep x-ray...

متن کامل

A Micro corona motor fabricated by a SU-8 built-on X-ray mask

A micro corona motor was fabricated using a membraneless built-on X-ray mask. Sharp stator electrodes of this motor ionize air molecules and ionized charges transfer onto the rotor surface, resulting in rotating rotor motions by Coulomb forces. For good performance, the stator’s electrodes should be wide (axial) and have sharp tips. Therefore, X-ray lithography was adopted for precise, high asp...

متن کامل

The fabrication of x-ray masks using proton beam writing

We have developed a simplified method of fabricating x-ray masks for deep x-ray lithography by using proton beam writing (PBW) without subsequent soft x-ray copying steps. Combining direct PBW and subsequent electroplating, x-ray masks with gold absorber patterns of up to 11 μm height and with vertical and smooth sidewalls were fabricated. The smallest size in the absorber pattern is less than ...

متن کامل

Innovative SU-8 Lithography Techniques and Their Applications

SU-8 has been widely used in a variety of applications for creating structures in micro-scale as well as sub-micron scales for more than 15 years. One of the most common structures made of SU-8 is tall (up to millimeters) high-aspect-ratio (up to 100:1) 3D microstructure, which is far better than that made of any other photoresists. There has been a great deal of efforts in developing innovativ...

متن کامل

Special Issue: 15 Years of SU8 as MEMS Material

In 1997, the first paper using SU-8 as a material for microfabrication was published [1], demonstrating the interest of this negative photoresist for the near-UV structuration of thick layers and the manufacturing of high aspect-ratio components. SU-8 quickly became a cheap alternative to X-ray LIGA, at least for applications that did not require the extreme aspect ratios and precision that can...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Micromachines

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2015