Jet-printing of Active-Matrix TFT Backplanes for Displays and Sensors
نویسندگان
چکیده
Deadline: February 3, 2006 Please direct all submission inquires to Felecia Marsh at 703/642/9090 or [email protected] Denver, Colorado September 17-22, 2006
منابع مشابه
Recent Achievement in Flexible & Printed Electronics
Organic electronic devices fabricated by entirely wet processes using organic semiconductors, insulators, metal nanoparticles, etc., have been attracting much attention. In particular, by utilizing printing techniques on plastic substrates, flexible electronic devices of large area and low-cost will be attained. However, conventional printing techniques such as flexo printing, screen printing a...
متن کاملTowards Flexible Full-color Active Matrix Organic Light-emitting Displays: Dry Dye Printing for Oled Integration and 280°c Amorphous-silicon Thin-film Transistors on Clear Plastic Substrates
The goal of this thesis is to achieve flexible full color AMOLED displays on clear plastic substrates using high temperature amorphous-silicon TFT’s. Dry dye-printing and solvent-enhanced dye diffusion were used to fabricate side-by-side red, green and blue organic light emitting device (OLED) pixels. The technique was then used to make combined polymer/small molecule devices, in which the prin...
متن کاملSelf-Assembled Nanodielectrics (SANDs) for Unconventional Electronics
The field of unconventional electronics represents a new opportunity for the semiconductor and electronics industries.1 This broad field encompasses both “printed organic/inorganic” and “transparent” electronics. The first technology aims at the fabrication of extremely cheap electronic devices such rf-id tags, ‘smart’ cards, flexible electronic paper, and backplane circuitry for active matrix ...
متن کاملEffect of Ink Formulation and Paper Surface Morphology on Ink-jet Printing Properties
The purpose of this study was to investigate the effect of type of alcohols and humectants in inks formulation, and the papers surface morphology on the ink-jet printing properties. In order to investigate the influence of alcohol and humectant types on printing properties, the optimum ink formulation from previous study, which contained C.I. Reactive Blue 21 Ink2 was formulated with different ...
متن کاملLarge-area compliant tactile sensors using printed carbon nanotube active-matrix backplanes.
A 20 × 20 pixel pressure sensor array based on a printed active-matrix single-wall carbon-nanotube thin-film transistor backplane is presented. Using a gravure printing process that is compatible with fully printed large-area roll-to-roll processing, a 97% device yield is obtained on the 400-transistor backplane. As a proof of concept, pressure sensors are integrated to map the applied tactile ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005