Predicting Storability of Fruits and Vegetables in Passive Evaporative Cooling Structures
نویسندگان
چکیده
Post-harvest losses of fruits and vegetables in developing countries are mostly as a result of in proper storage facilities. While refrigerated cool-stores are the best method of preserving fruits and vegetables, they are expensive to buy and run. Consequently, in developing countries there is an interest in simple low-cost alternatives, many of which depends on evaporative cooling, which is simple and does not require any external power supply. Evaporative cooling occurs when air, that is not too humid, passes over a wet surface; the faster the rate of evaporation the greater the cooling. The efficiency of an evaporative cooling structure depends on the humidity of the surrounding air. Therefore, this paper reviews the concept, principles and methods of evaporative cooling for the preservation of fruits and vegetables. The evaporative cooling structures has prospect for use for short term preservation of fruits and vegetables after harvested. It reduces the storage temperature and also increases the relative humidity within the optimum level of the storage thereby helps in keeping the fruits and vegetables
منابع مشابه
Principles and Application of Evaporative Cooling Systems for Fruits and Vegetables Preservation
In order to extend the shelf life of fruits and vegetables, they need to be properly stored. Proper storage means controlling both the temperature and relative humidity of the storage area. The essence of storage is of great importance because not all the harvested vegetables or crops in general will be used immediately after harvest so, measures of preserving the vegetables before it exceeds i...
متن کاملExergy Analysis of Evaporative Cooling for Optimum Energy Consumption in Diverse Climate Conditions
In this paper, exergy of conditioned air, exergy efficiency, irreversibility, and entropy generation of common models of evaporative cooling have been investigated in five cities of Iran. Direct evaporative cooling (DEC), indirect evaporative cooling (IEC), and two-stage IEC/DEC as the most popular methods of cooling have been modeled. Atmospheric conditions are considered as the dead state of ...
متن کاملOptimization and increase production and efficiency of gas turbines GE-F9 using Media evaporative cooler in Fars combined cycle power plant
Gas turbines play an important role in supplying power for the country especially in peak electricity load. The main disadvantages are the turbines, they produce large changes are a result of climate change. However, in times of peak electricity grid and at the same time warm months, can produce gas turbines under the effect of ambient temperature, the amount of reduced considerably. The method...
متن کاملA systematic approach for a better thermal management of photovoltaic systems- A review
Solar energy is the highly recognized energy source, capable of fulfilling the world’s future energy demands. The solar photovoltaic technology involves the unmediated transformation of sunlight into electricity. A little fraction is converted into electricity and the remaining gets exhausted as unused heat. This results in an increase in the operating temperature of the PV Panel. The conversio...
متن کاملDesign and construction of evaporative local cooling coatings and evaluate their efficiency in improving some perceptual indicators in laboratory conditions
Introduction: One way to reduce the level of heat strain is to use personal evaporative cooling coats. such as the wrist, ankle, head and neck. The purpose of this study is to design, construct, and determine the cooling power of local cooling coatings and evaluate their efficiency in improving perceptual indicators in the laboratory. Materials and Methods: Initially, the design and constructio...
متن کامل