Creep Behavior of Poly(lactic acid) Based Biocomposites

نویسندگان

  • Marco Morreale
  • Maria Chiara Mistretta
  • Vincenzo Fiore
چکیده

Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 °C). The results showed that the creep behavior of the composites is strongly influenced by the temperature and the woven fabrics used. As preliminary characterization, quasi-static tensile tests and dynamic mechanical tests were carried out on the composites. Furthermore, fabrics (both flax and jute) were tested as received by means of quasi-static tests and creep tests to evaluate the influence of fabrics mechanical behavior on the mechanical response of the resulting composites. The morphological analysis of the fracture surface of the tensile samples showed the better fiber-matrix adhesion between PLA and jute fabric.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Response Surface Methodology for the Optimization of Preparation of Biocomposites Based on Poly(lactic acid) and Durian Peel Cellulose

Response surface methodology was used to optimize preparation of biocomposites based on poly(lactic acid) and durian peel cellulose. The effects of cellulose loading, mixing temperature, and mixing time on tensile strength and impact strength were investigated. A central composite design was employed to determine the optimum preparation condition of the biocomposites to obtain the highest tensi...

متن کامل

In Vitro Monitoring of Surface Mechanical Properties of Poly(L-Lactic Acid) Using Microhardness

Poly(L-lactic acid) (PLLA) was immersed in a simulated body fluid (SBF) solution at 37.58C for distinct times. The variation of the surface mechanical properties of PLLA samples with immersion time was followed by microhardness. These measurements showed that PLLA microhardness decreased significantly ( 60%) after only 30 days of immersion. The results were explained in terms of hydrolytic degr...

متن کامل

Antifungal activity of nano-composite films based on Poly Lactic Acid

Objective(s): Nanocomposite active packaging systems were used to prepare antimicrobial and antifungal properties. This study was to investigate the physical and antimicrobial activity of prepared films against three types of aflatoxin producing fungi Aspergillus Flavus. Material and methods: For investigating the effect of antibacterial nano-covers, the direct contact of 0, 1%, 3% and 5%...

متن کامل

Synthesis and characterization of nHA-PLA composite coating on stainless steel by dip-coating process for biomedical applications

316L stainless steel is the most commonly used metallic material in the manufacture of orthopedic implants. To achive better properties metal implants often coated with biocomposites. A sol–gel method was used for coating of Poly lactic acid (PLA)/Hydroxyapatite nanopowder (nHA) on stainless steel 316L substrate. The X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) wer...

متن کامل

Review and comparative analysis of keratin biocomposites with composites based on collagen

Keratin and collagen are ones of the most abundant proteins which can be used in a variety of biomedical application due to their biocompatibility and biodegradability. Even though, keratin and collagen biomaterials are very high potential for tissue engineering applications. But, the major disadvantages of the natural biomolecules are their poor mechanical properties. Therefore it must be modi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2017