XRD Characterization of AlN Thin Films Prepared by Reactive RF-Sputter Deposition
نویسندگان
چکیده
AlN thin films have been grown on R((1-12) surface-cut)-Al2O3, SiO2-glass and C((001) surface-cut)-Al2O3 substrates, by using a reactive-RF-sputter-deposition method. X-ray diffraction (XRD) shows that AlN film has (110) orientation of wurtzite crystal structure for R-Al2O3 and (001) orientation for SiO2-glass and C-Al2O3 substrates. The film thickness was analyzed by Rutherford backscattering spectroscopy (RBS) and it appears that XRD intensity does not show a linear increase with the film thickness but a correlation with the stress, i.e., deviation of the lattice parameter of the film from that of bulk. The film composition and impurities have been analyzed by ion beam techniques. Effects of highenergy ion beams are briefly presented on atomic structure (whether stress relaxation occurs or not), surface morphology and optical properties.
منابع مشابه
Growth and surface characterization of piezoelectric AlN thin films on silicon (100) and (110) substrates
ABSTRACT: This work investigates the fundamental growth of c-axis oriented piezoelectric AlN thin films by RF reactive sputtering on p-type (100) and (110) silicon substrates. Substrates are treated with a 1% HF solution before deposition to remove the native oxide followed by backsputtering using argon ions. X-ray diffraction shows a (0001) oriented columnar texture of AlN grains which is the ...
متن کاملPreparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices
In this work, aluminum nitride (AlN) thin films with different thicknesses were deposited on quartz and silicon substrates using single ion beam sputtering technique. The physical and chemical properties of prepared films were investigated by different characterization technique. X-ray diffraction (XRD) spectra revealed that all of the deposited films have an amorphous str...
متن کاملA novel surface micromachining process to fabricate AlN unimorph suspensions and its application for RF resonators
A novel surface micromachining process is reported for aluminum nitride (AlN) thin films to fabricate piezoelectric unimorph suspension devices for micro actuator applications. Wet anisotropic etching of AlN thin film is used with a Cr metal mask layer in the microfabrication process. Tetra methyl ammonium hydroxide (TMAH) of 25 wt.% solution is used as an etching solution for the AlN thin film...
متن کاملSynthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler
Boron included aluminium nitride (B-AlN) thin films were synthesized on silicon (Si) substrates through chemical vapour deposition ( CVD ) at 773 K (500 °C). tert-buthylamine (tBuNH2) solution was used as nitrogen source and delivered through gas bubbler. B-AlN thin films were prepared on Si-100 substrates by varying gas mixture ratio of three precursors. The structural properties of the films ...
متن کاملCharacterization and Microstructure of Titanium Dioxide Prepared by Radio Frequency Magnetron Sputtering
Titanium oxide (TiO2) thin films were deposited by RF magnetron sputtering on Si and glass substrates. The microstructure, surface morphology, and optical properties of the thin films were investigated by grazing incidence X-ray diffraction (GIXD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and UV/VIS spectrophoto...
متن کامل