CONTROL ENGINEERING LABORATORY Fuzzy modelling for a rotary dryer
نویسندگان
چکیده
In this research a fuzzy model is developed for a rotary dryer. It is applied to the pilot plant rotary dryer located in the Control Engineering Laboratory at Oulu University. Firstly, a literature review looking at the current situation of fuzzy modelling and comparison of different methods is done. One modelling method is then applied to the building of the model from data. The rule parameters are determined on the basis of clusters created by Kohonen learning rule method and the initial model is optimised by the trial and error method. The resulting model behaviour is examined with simulation and, the results achieved are compared with other models.
منابع مشابه
Fuzzy modelling for a rotary dryer
In this research a fuzzy model is developed for a rotary dryer. It is applied to the pilot plant rotary dryer located in the Control Engineering Laboratory at Oulu University. Firstly, a literature review looking at the current situation of fuzzy modelling and comparison of different methods is done. One modelling method is then applied to the building of the model from data. The rule parameter...
متن کاملDevelopment of a Self-Tuning Fuzzy Logic Controller for a Rotary Dryer
It is well known that the control of a rotary dryer is difficult due to long delay times of the process. The main target of this research was to find a self-tuning technique for tuning the parameters of the fuzzy logic controller, which has been developed to the pilot plant rotary dryer located in the Control Engineering Laboratory at the University of Oulu. The aim is to improve the performanc...
متن کاملUtilization of fuzzy controller for laboratory scale convective fruit dryers
In the present study, a fruit dryer system that is controlled based on fuzzy logic is presented. A laboratory scale cabinet was developed which includes four sensors in different lengths for monitoring the cabin temperature and humidity. Fuzzy base controller is a new monitoring technique in food industrial machines that utilize sensors captured values as its input parameters to make a suitable...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کامل