Effect of sulfate on the transformation of corrosion scale composition and bacterial community in cast iron water distribution pipes.

نویسندگان

  • Fan Yang
  • Baoyou Shi
  • Yaohui Bai
  • Huifang Sun
  • Darren A Lytle
  • Dongsheng Wang
چکیده

The chemical stability of iron corrosion scales and the microbial community of biofilm in drinking water distribution system (DWDS) can have great impact on the iron corrosion and corrosion product release, which may result in "red water" issues, particularly under the situation of source water switch. In this work, experimental pipe loops were set up to investigate the effect of sulfate on the dynamical transformation characteristics of iron corrosion products and bacterial community in old cast iron distribution pipes. All the test pipes were excavated from existing DWDS with different source water supply histories, and the test water sulfate concentration was in the range of 50-350 mg/L. Pyrosequencing of 16S rRNA was used for bacterial community analysis. The results showed that iron release increased markedly and even "red water" occurred for pipes with groundwater supply history when feed water sulfate elevated abruptly. However, the iron release of pipes with only surface water supply history changed slightly without noticeable color even the feed water sulfate increased multiply. The thick-layered corrosion scales (or densely distributed tubercles) on pipes with surface water supply history possessed much higher stability due to the larger proportion of stable constituents (mainly Fe3O4) in their top shell layer; instead, the rather thin and uniform non-layered corrosion scales on pipes with groundwater supply history contained relatively higher proportion of less stable iron oxides (e.g. β-FeOOH, FeCO3 and green rust). The less stable corrosion scales tended to be more stable with sulfate increase, which was evidenced by the gradually decreased iron release and the increased stable iron oxides. Bacterial community analysis indicated that when switching to high sulfate water, iron reducing bacteria (IRB) maintained dominant for pipes with stable corrosion scales, while significant increase of sulfur oxidizing bacteria (SOB), sulfate reducing bacteria (SRB) and iron oxidizing bacteria (IOB) was observed for pipes with less stable corrosion scales.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Formation and release behavior of iron corrosion products under the influence of bacterial communities in a simulated water distribution system.

To understand the formation and release behavior of iron corrosion products in a drinking water distribution system, annular reactors (ARs) were used to investigate the development processes of corrosion products and biofilm community as well as the concomitant iron release behavior. Results showed that the formation and transformation of corrosion products and bacterial community are closely r...

متن کامل

Discolouration loose deposits in distribution systems: composition, behaviour and practical aspects

The occurrence of discoloured water at the tap is one of the most frequent reasons for customers to complain. Water discolouration arises from the resuspension of loose deposits (LD) that accumulate in drinking water pipes, due to velocity increase. Because of its typical brownish/reddish colour, discoloured water is traditionally perceived as a consequence of cast-iron pipes corrosion, even in...

متن کامل

Temperature Effects on Iron Corrosion

Temperature is an often overlooked water quality parameter that may influence corrosion of iron pipes in drinking water distribution systems. This study examined corrosion of cast iron samples in an aerobic, microbially stable water at different constant temperatures (5, 20, and 25°C) as well as in waters where the temperature continuously cycled (17.5 – 23°C and 5 – 20°C). The composition and ...

متن کامل

Impact of RO-desalted water on distribution water qualities.

A large-scale pilot distribution study was conducted to investigate the impacts of blending different source waters on distribution water qualities, with an emphasis on metal release (i.e. corrosion). The principal source waters investigated were conventionally treated ground water (G1), surface water processed by enhanced treatment (S1), and desalted seawater by reverse osmosis membranes (RO)....

متن کامل

Monitoring of distribution water qualities under various source water blending.

The main goal of this large-scale pilot distribution study was to systematically investigate the impacts of blending different source waters on distribution water qualities. The principal source waters investigated were conventionally treated ground water (G1), surface water processed by enhanced treatment (S1), and desalted seawater by reverse osmosis membranes (RO). Due to the nature of raw w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Water research

دوره 59  شماره 

صفحات  -

تاریخ انتشار 2014