Ultralow thermal conductivity of multilayers with highly dissimilar Debye temperatures.

نویسندگان

  • Edward Dechaumphai
  • Dylan Lu
  • Jimmy J Kan
  • Jaeyun Moon
  • Eric E Fullerton
  • Zhaowei Liu
  • Renkun Chen
چکیده

Thermal transport in multilayers (MLs) has attracted significant interest and shows promising applications. Unlike their single-component counterparts, MLs exhibit a thermal conductivity that can be effectively engineered by both the number density of the layers and the interfacial thermal resistance between layers, with the latter being highly tunable via the contrast of acoustic properties of each layer. In this work, we experimentally demonstrated an ultralow thermal conductivity of 0.33 ± 0.04 W m(-1) K(-1) at room temperature in MLs made of Au and Si with a high interfacial density of ∼0.2 interface nm(-1). The measured thermal conductivity is significantly lower than the amorphous limit of either Si or Au and is also much lower than previously measured MLs with a similar interfacial density. With a Debye temperature ratio of ∼3.9 for Au and Si, the Au/Si MLs represent the highest mismatched system in inorganic MLs measured to date. In addition, we explore the prior theoretical prediction that full phonon dispersion could better model the interfacial thermal resistance involving materials with low Debye temperatures. Our results demonstrate that MLs with highly dissimilar Debye temperatures represent a rational approach to achieve ultralow thermal conductivity in inorganic materials and can also serve as a platform for investigating interfacial thermal transport.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

First-Principles Determination of Ultralow Thermal Conductivity of monolayer WSe2

By using first-principles calculations combined with the phonon Boltzmann transport equation, we systematically investigate the phonon transport of monolayer WSe2. Compared with other 2D materials, the monolayer WSe2 is found to have an ultralow thermal conductivity due to the ultralow Debye frequency and heavy atom mass. The room temperature thermal conductivity for a typical sample size of 1 ...

متن کامل

Equilibrium Molecular Dynamics (MD) Simulation Study of Thermal Conductivity of Graphene Nanoribbon: A Comparative Study on MD Potentials

The thermal conductivity of graphene nanoribbons (GNRs) has been investigatedusing equilibrium molecular dynamics (EMD) simulation based on Green-Kubo (GK)method to compare two interatomic potentials namely optimized Tersoff and 2nd generationReactive Empirical Bond Order (REBO). Our comparative study includes the estimation ofthermal conductivity as a function of temperature, l...

متن کامل

Ultralow thermal conductivity of isotope-doped silicon nanowires.

The thermal conductivity of silicon nanowires (SiNWs) is investigated by molecular dynamics (MD) simulation. It is found that the thermal conductivity of SiNWs can be reduced exponentially by isotopic defects at room temperature. The thermal conductivity reaches the minimum, which is about 27% of that of pure 28Si NW, when doped with 50% isotope atoms. The thermal conductivity of isotopic-super...

متن کامل

Ultralow thermal conductivity in disordered, layered WSe2 crystals.

The cross-plane thermal conductivity of thin films of WSe2 grown from alternating W and Se layers is as small as 0.05 watts per meter per degree kelvin at room temperature, 30 times smaller than the c-axis thermal conductivity of single-crystal WSe2 and a factor of 6 smaller than the predicted minimum thermal conductivity for this material. We attribute the ultralow thermal conductivity of thes...

متن کامل

Ultralow thermal conductivity in all-inorganic halide perovskites.

Controlling the flow of thermal energy is crucial to numerous applications ranging from microelectronic devices to energy storage and energy conversion devices. Here, we report ultralow lattice thermal conductivities of solution-synthesized, single-crystalline all-inorganic halide perovskite nanowires composed of CsPbI3 (0.45 ± 0.05 W·m-1·K-1), CsPbBr3 (0.42 ± 0.04 W·m-1·K-1), and CsSnI3 (0.38 ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nano letters

دوره 14 5  شماره 

صفحات  -

تاریخ انتشار 2014