Rate-optimal Signal Design for Wireless Communications
نویسندگان
چکیده
In a tactical communications scenario, the transmitter will only have an imperfect estimate of the temporally correlated mobile RF channel. Given imperfect channel state information (CSI), we address the optimal signal design problem. Using the cutoff rate metric, we determine: (a) the optimal allocation of power and bandwidth between information and training signals, (b) the optimal binary input as a function of SNR and CSI quality, (c) an adaptive modulation scheme which switches between only two inputs based on the CSI quality. We show that this simple adaptive modulation scheme is nearly optimal at moderate to high SNR. We also establish that there is at most a 1 dB increase in the maximum penalty for using On-Off Keying instead of BPSK.
منابع مشابه
An ultra low power wake-up signal decoder for wireless nodes activation in Internet of Things technology
This paper proposes a new structure for digital address decoders based on flip-flops with application in wake-up signal generators of wireless networks nodes. Such nodes equipped with this device can be utilized in Internet of Things applications where the nodes are dependent on environment energy harvesting to survive for a long time. Different parts in these wireless nodes should have an e...
متن کاملDesign of a novel congestion-aware communication mechanism for wireless NoC architecture in multicore systems
Hybrid Wireless Network-on-Chip (WNoC) architecture is emerged as a scalable communication structure to mitigate the deficits of traditional NOC architecture for the future Multi-core systems. The hybrid WNoC architecture provides energy efficient, high data rate and flexible communications for NoC architectures. In these architectures, each wireless router is shared by a set of processing core...
متن کاملThroughput Maximization for Multi-Slot Data Transmission via Two-Hop DF SWIPT-Based UAV System
In this paper, an unmanned aerial vehicle (UAV) assisted cooperative communication system is studied, wherein a source transmits information to the destination through an energy harvesting decode-and-forward UAV. It is assumed that the UAV can freely move in between the source-destination pair to set up line of sight communications with the both nodes. Since the battery of the UAV may be limite...
متن کاملOptimization Capabilities of LMS and SMI Algorithm for Smart Antenna Systems (RESEARCH NOTE)
In the present paper convergence characteristics of Sample matrix Inversion (SMI) and Least Mean Square (LMS) adaptive beam-forming algorithms (ABFA) are compared for a Smart Antenna System (SAS) in a multipath environment. SAS are employed at base stations for radiating narrow beams at the desired mobile users. The ABFA are incorporated in the digital signal processors for adjusting the weight...
متن کاملA Tutorial on Hybrid PLL Design for Synchronization in Wireless Receivers
Coherent reception in digital wireless communications involves generating a local carrier that is in phase with the received carrier, and then using this local carrier in order to demodulate the received signal. Generation of the local carrier is generally done via a Phase Lock Loop (PLL). The receiver also includes a symbol timing synchronization PLL, whose purpose is to determine the optimal ...
متن کاملLinearization of M-LINC Systems Using GMP and Particle Swarm Optimization for Wireless Communications
In this paper, an efficient algorithm for the efficiency maximization of the multilevel linear amplification using nonlinear components (M-LINC) systems is proposed regarding the linearity of the system. In this algorithm, we use the generalized memory polynomial (GMP) to provide a behavioral model for the power amplifier (PA) and calculate the power spectral density (PSD) of the output signal ...
متن کامل