Study of Micro-High Speed Bearings and

نویسندگان

  • Kousuke Isomura
  • Shin-ichi Togo
  • Shuji Tanaka
چکیده

Micromachine gas turbines require extremely high rotor speed to realize the same impeller tip speed to the large gas turbines, by very small diameter of the impellers. Hence, the rotordynamics is one of the critical issues. Especially, the bearing speed will exceed the range of experience in any existing turbomachines, and hence the method to achieve the stable operation at the required design speed has not established, yet. The characteristics of variety of bearings will be reviewed, and the issues of the bearing selection and the rotordynamic design will be addressed. 1.0 INTRODUCTION 1.1 New Markets for Micromachine Gas Turbine Generators Recent advances in autonomous robots are causing increase of power requirements. Robots are expanding their capability of complicated movement, and developers are trying to add a lot of new functions to a robot, such as playing trumpet for example. These new functions use more servomotors that increase the total power requirement of a robot. So far, almost all robots use batteries for their power source. Lithium Ion batteries and Nickel-Metal Hydride batteries are the major types of batteries currently used in robots. Battery is well known as a high power density electric source. It is a good power source for applications as robots that require large current to power many servomotors. However, battery has a weakness of low energy density. The continuous operation time is short. These day’s autonomous robots can operate only 30 minutes after half a day of battery recharging. This short operation time will largely limit the application of autonomous robots. A lot of technology improvements have already been achieved over decades for batteries, and the room for large performance improvement is becoming small, now. Isomura, K.; Togo, S.-I.; Tanaka, S. (2005) Study of Micro-High Speed Bearings and Rotor Dynamics for Micromachine Gas Turbines. In Micro Gas Turbines (pp. 7-1 – 7-62). Educational Notes RTO-EN-AVT-131, Paper 7. Neuilly-sur-Seine, France: RTO. Available from: http://www.rto.nato.int/abstracts.asp.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of the Notching HSS Rolls by CBN Tool using RSM Method

One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable. One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable.When the roller is placed on the product...

متن کامل

Experimental Study of a High Speed Micro Waterwheel

Waterwheels are the oldest types of hydraulic machines. These turbines are of relatively simple design, large diameter, low rotational speed and high torques. But applying them as micro hydros of high speed and small diameter is yet to be explored. A micro hydro waterwheel of one meter diameter was designed and manufactured at the Iranian  esearc†h Organization for Science and Technology (IROST...

متن کامل

High-speed Electrical Motor/generator Supported by Air Bearings

This paper reports on the development of a high-speed electrical machine which can be used as motor or generator for application in micro heat engines. The machine has a rated power of 200 W at a rotational speed of 600 000 rpm and is supported by self-acting air bearings. The design process outlined in the paper focuses on aspects such as electromagnetic design, bearing design, rotordynamic be...

متن کامل

H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System

H∞ controller for active magnetic bearings (AMBs) with flexible rotor system was designed in this paper. The motion equations of AMBs and flexible rotor system are built based on finite element methods (FEM). Weighting function matrices of H∞ controller for AMBs are studied for both the sensitivity and the complementary sensitivity of H∞ control theory. The simulation shows that the H∞ control ...

متن کامل

AN INTELLIGENT FAULT DIAGNOSIS APPROACH FOR GEARS AND BEARINGS BASED ON WAVELET TRANSFORM AS A PREPROCESSOR AND ARTIFICIAL NEURAL NETWORKS

In this paper, a fault diagnosis system based on discrete wavelet transform (DWT) and artificial neural networks (ANNs) is designed to diagnose different types of fault in gears and bearings. DWT is an advanced signal-processing technique for fault detection and identification. Five features of wavelet transform RMS, crest factor, kurtosis, standard deviation and skewness of discrete wavelet co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005