Correction: Liu, B., et al. Quantitative Evaluation of Pulsed Thermography, Lock-In Thermography and Vibrothermography on Foreign Object Defect (FOD) in CFRP. Sensors 2016, 16, doi:10.3390/s16050743
نویسندگان
چکیده
n/a.
منابع مشابه
Quantitative Evaluation of Pulsed Thermography, Lock-in Thermography and Vibrothermography on Foreign Object Defect (FOD) in CFRP
In this article, optical excitation thermographic techniques, including pulsed thermography and lock-in thermography, were used to detect foreign object defect (FOD) and delamination in CFRP. Then, vibrothermography as an ultrasonic excitation technique was used to detect these defects for the comparative purposes. Different image processing methods, including cold image subtraction (CIS), prin...
متن کاملExperimental Comparison of Lock-in and Pulsed Thermography for the Nondestructive Evaluation of Aerospace Materials
Infrared thermography is a nondestructive evaluation technique aimed to the detection of surface temperature variations related to the presence of subsurface defects. Several inspection techniques have been developed over the years with basically two approaches, lock-in thermography and pulsed thermography. These two techniques are based on the principle of heat diffusion and thermal wave refle...
متن کاملEnhanced Infrared Image Processing for Impacted Carbon/Glass Fiber-Reinforced Composite Evaluation
In this paper, an infrared pre-processing modality is presented. Different from a signal smoothing modality which only uses a polynomial fitting as the pre-processing method, the presented modality instead takes into account the low-order derivatives to pre-process the raw thermal data prior to applying the advanced post-processing techniques such as principal component thermography and pulsed ...
متن کاملA Review of Microwave Thermography Nondestructive Testing and Evaluation
Microwave thermography (MWT) has many advantages including strong penetrability, selective heating, volumetric heating, significant energy savings, uniform heating, and good thermal efficiency. MWT has received growing interest due to its potential to overcome some of the limitations of microwave nondestructive testing (NDT) and thermal NDT. Moreover, during the last few decades MWT has attract...
متن کاملEddy Current Pulsed Thermography with Different Excitation Configurations for Metallic Material and Defect Characterization
This paper reviews recent developments of eddy current pulsed thermography (ECPT) for material characterization and nondestructive evaluation (NDE). Due to the fact that line-coil-based ECPT, with the limitation of non-uniform heating and a restricted view, is not suitable for complex geometry structures evaluation, Helmholtz coils and ferrite-yoke-based excitation configurations of ECPT are pr...
متن کامل