Nature of the Surface Compounds and Reactions Observed on Graphite Electrodes
نویسنده
چکیده
The nature and composition of the surface of pyrolytic graphite and the consequent possible effects, when the material is used as an electrode. are considered on the basis of the structure of the graphite and of the handling and/or treatment to which the electrodes may have been exposed. Because of the relatively limited studies on pyrolytic graphite, certain aspects of the behavior of other types of graphite and of carbon are discussed owing to their probable relation to the behavior of pyrolytic graphite. An appreciation of the constitution of graphite electrodes in terms of surface compounds and of the possible interaction of these compounds with solution species or their reaction products, when the electrodes are used in electrolytic processes, is essential for their optimum utilzation. The main areas surveyed are the structure of pyrolytic graphite as related to electrode usage, types of possible compound formation, electrolytic behavior of graphite electrodes, and formation of carbonoxygen and related organic surface compounds with the resulting influence on adsorption and other
منابع مشابه
Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...
متن کاملEffect of Different CNT’s Oxidation Methods on Thiocoline Detection by Surfactant Modified Graphite Electrodes
Carbon nanotubes are regarded as promising building blocks for the construction of novel biosensors due to their unique properties like fast electron transfer, high electrocatalytic effect and good biocompatibility. In the present study, the effect of different chemical oxidation’s methods of multi-walled carbon nanotubes (MWCNTs) on the electrochemical behavior of modified graphite electrodes ...
متن کاملThe Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism
Ilmenite, aluminum and graphite can be used to produce in-situ Al2O3/TiC–Fe composites which are used as cutting tools. Few publications can be found in the literature that discusse the effect of molar ratio of aluminum and graphite on the Al2O3/TiC–Fe formation mechanism. Therefore, the present research is designed to make the issue clear. To achieve this goal, at first, the mechanism o...
متن کاملFabrication of new carbon paste electrodes based on gold nano-particles self-assembled to mercapto compounds as suitable ionophores for potentiometric determination of Copper ions
In the present study, we investigate the potentiometric behavior of Cu2+ carbon paste electrodes based on two mercapto compounds 2-Ethylmino-5-Mercapto-1,3,4-Thiadiazole (EAMT) and 2-Acetylamino-5-mercapto-1,3,4-thiadiazole (AAMT) self-assembled on gold nano-paricle (GNP) as ionophore. Then, the results obtained from the modified electrodes are compared. The self-assembled ionophores exhibit a ...
متن کاملDirect electron transfer reactions of laccases from different origins on carbon electrodes.
Electrochemical studies of laccases from basidiomycetes, i.e., Trametes hirsuta, Trametes ochracea, Coriolopsis fulvocinerea, Cerrena maxima, and Cerrena unicolor, have been performed. Direct (mediatorless) electrochemistry of laccases on graphite electrodes has been investigated with cyclic voltammetry, square wave voltammetry as well as potentiometry. For all mentioned high potential laccases...
متن کامل