Differences in Infiltration and Evaporation of Diesel and Gasoline Droplets Spilled onto Concrete Pavement
نویسندگان
چکیده
Pollution at gas stations due to small spills that occur during vehicle refueling have received little attention. We have performed laboratory experiments to assess evaporation and infiltration of fuel spilled onto concrete. Changes in the concrete mass after small amounts of diesel and gasoline were spilled have been analyzed. Variation in humidity, among other parameters, clearly affects the measured mass since condensed water is constantly added to or released from the concrete. This mass experiences an about exponential decay in time. The difference in behavior between both fuel types is important as the percentage of evaporated mass is much larger for gasoline, while infiltration is more significant for diesel. A statistical analysis suggests that the initial spill amount does not significantly affect the fraction of infiltrated fuel over time. This finding is in agreement with pore-scale simulations that we performed. A significant amount of fuel could be seeping into soil and groundwater underneath concrete pavement at gas stations or could be released to the atmosphere. Possible solutions for pavement and groundwater pollution are considered.
منابع مشابه
Evaporation Characteristics of Diesel and Biodiesel Fuel Droplets on Hot Surfaces
In CI engines, the evaporation rate of fuel on various hot surfaces, including the combustion chamber, has a significant effect on deposit formation and accumulation, the exhaust emissions of PM and NOx, and their efficiency. Therefore, the evaporation of liquid fuel droplets impinging on hot surfaces has become an important subject of interest to engine designers, manufacturers, and researcher...
متن کاملTwo approaches to modelling the heating of evaporated droplets
Two approaches to modelling the heating of evaporated droplets have been widely used in engineering applications. In the first approach the heat rate supplied to the droplets to raise their temperatures, q̇d, is derived from the requirement that droplet evaporation rates, inferred from steady-state equations for mass and heat balance, should be the same. The second approach is based on the direc...
متن کاملDetermining the Relative Importance of Parameters Affecting Concrete Pavement Thickness
Spending costs in construction of road pavements has turned this subject into one of the significant points in transportation infrastructure of countries. Concrete slabs consider as a paving method with ability of reducing the rehabilitation needs. Therefore, to manage costs and optimize the thickness of concrete pavements, recognizing the amount of determinative factors’ influence will be requ...
متن کاملInfluences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength
Weak bonding between layers of pavement leads to damages on the composite pavement. Bonding plays an important role in the durability and maintenance of composite pavement layers. The present study evaluates the factors effective in bond strength of the interface between concrete and asphalt pavements. The factors considered for this purpose include steel slag percentage in the concrete pavemen...
متن کاملEvaluation of Coal Waste Ash and Rice Husk Ash on Properties of Pervious Concrete Pavement
The use of pervious concrete has been significantly considered in recent years. This consideration is due to the properties of pervious concrete in relating to the environmental sustainability that is utilized in the effective management of the runoff from rainfall. Coal extraction and rice husk obtained from milling, produces wastes that have no application and followed by environmental pollut...
متن کامل