Measurement of the strength of iodine-125 seed moving at unknown speed during implantation in brachytherapy

The aim of this study is to demonstrate the feasibility of estimating the strength of the moving radiation source during patient implantation. The requirement for the counting time was investigated by comparing the results of the measurements for the static source with those for the source moving at 2, 5, 10 and 20 cm s(-1). The utilized source was (125)I with an air-kerma strength of 0.432 U (μGym(2)h(-1)). The detector utilized was a plastic scintillation detector (8 cm × 5 cm × 2 cm in thickness) set at 8 cm away from the needle to guide the source. Experiments were conducted in order to determine the most desirable counting time. Analysis using the maximum of the measured values while the source passed through the needle indicated that the results for the moving source increased more than those for the static source as the counting time decreased. The combined standard uncertainty, with the coverage factor of 1, was within 4% at the counting time of 100 ms. This investigation supported the feasibility of the method proposed for estimating the source strength during the implantation procedure, regardless of the source speed. The method proposed is a potential option for reducing the risk of accidental replacements of sources with those of incorrect strengths.