Influence of Cu column under-bump-metallizations on current crowding and Joule heating effects of electromigration in flip-chip solder joints
نویسندگان
چکیده
منابع مشابه
Effect of three-dimensional current and temperature distributions on void formation and propagation in flip-chip solder joints during electromigration
Articles you may be interested in Influence of Cu column under-bump-metallizations on current crowding and Joule heating effects of electromigration in flip-chip solder joints Effect of void propagation on bump resistance due to electromigration in flip-chip solder joints using Kelvin structure Appl. Investigation of void nucleation and propagation during electromigration of flip-chip solder jo...
متن کاملRelieving Hot-Spot Temperature and Current Crowding Effects During Electromigration in Solder Bumps by Using Cu Columns
Solder joints with Cu columns appear to be one of the best structures to resist electromigration. Three-dimensional thermoelectrical analysis was employed to simulate the current density and temperature distributions for eutectic SnPb solder bumps with 0.5, 5, 25, 50, and 100 lm Cu under bump metallization (UBM). It was found that the hot spots and current crowding effects in the solder were re...
متن کاملElectromigration Characteristic of SnAg3.0Cu0.5 Flip Chip Interconnection
1 Ph.D. Candidate 2 Corresponding Author, Professor Abstract Electromigration is a reliability concern of microelectronic interconnections, especially for flip chip solder bump with high current density applied. This study shows that with the line-to-bump geometry in a flip chip solder joint, the current density changes significantly between the Al trace and the bump, while the current crowding...
متن کاملMechanism of electromigration-induced failure in flip-chip solder joints with a 10-μm-thick Cu under-bump metallization
The electromigration-induced failure in flip-chip eutectic SnPb solder joints with a 10m-thick Cu under-bump metallization (UBM) was studied without the effect of current crowding in the solder region. The current crowding occurred inside the UBM instead of in the solder joint at the current density of 3.0 × 10 A/cm because of the spreading of current in the very thick Cu UBM. In these joints, ...
متن کاملComputational damage mechanics of electromigration and thermomigration
Articles you may be interested in Thermomigration and electromigration in Sn58Bi solder joints Electromigration in flip chip solder joints having a thick Cu column bump and a shallow solder interconnect Effect of entropy production on microstructure change in eutectic SnPb flip chip solder joints by thermomigration Appl. Reliability of solder joints under Electromigration (EM) and Thermomigrati...
متن کامل