Analysis of Half-coiled Short-pitch Windings with Different Phase Belt for Multiphase Bearingless Motor
نویسندگان
چکیده
The analysis and comparation of the half-coiled short-pitch windings with different phase belt are presented in the paper. The half-coiled short-pitch windings can supply the odd and even harmonics simultaneously, which can be applied in multiphase bearingless motor (MBLM). The space harmonic distribution of the half-coiled short-pitch windings with two kinds of phase belt is studied wi th respect to different coil pitch, and the suitable coil pitch can be selected from the analysis results to reduce the additional radial force and torque pulse. The two kinds of half-coiled short-pitch windings are applied to the fiveand six-phase bearingless motor, and the comparation from the Finite Element Method (FEM) results shows that the winding with 2π/m phase belt is fit for the five phase bearingless motor and the winding with π/m phase belt is suitable for the six phase bearingless motor. Finally, a five phase surface-mounted permanent magnet (PM) bearingless motor is built and the experimental results are presented to verify the validity and feasibility of the analysis. The results presented in this paper will give useful guidelines for design optimization of the MBLM.
منابع مشابه
Using an Appropriate Controller for Independent Current Control for Motoring of Force Windings of Bearing less Induction Motor
A bearingless induction machine has combined characteristics of induction motor and magnetic bearings. Therefore, the advantages are small size and low-cost. In the magnetic suspension of the bearingless motors, suspension forces are generated based on the feedback signals of displacement sensors detecting the movement of the rotor shaft. The suspension forces are generated taking an advantage ...
متن کاملFlux-Linkage Model Including Cross-Saturation for a Bearingless Synchronous Reluctance Motor
This paper deals with magnetic modeling of a bearingless synchronous reluctance motor. The motor under consideration includes two separate sets of three-phase windings, one for torque production and the other one for radialforce production. This paper demonstrates by means of finite-element analysis, that it is unrealistic to assume the two three-phase windings to be decoupled from one another....
متن کاملOptimal Design of Bearingless Permanent Magnet-Type Synchronous Motors for Generating Maximum Levitation Force. J World Elec. Eng. Tech., 4 (1): 07-12
One maintenance task that still exist with conventional motors, are bearing lubrication and renewal. Bearingless motors are replaced with conventional motor that uses a magnetic levitation force to suspend a rotor without any mechanical contact. In bearingless motors, additional windings are wound together with motor windings in stator slots. In this paper, a bearingless permanent magnet-type s...
متن کاملComparison of convective heat transfer of turbulent nanofluid flow through helical and conical coiled tubes
Application of nanofluid and coiled tubes are two passive methods for increasing the heat transfer. In the present study, the turbulent flows of water and nanofluid in coiled tubes heat exchanger were numerically studied. CuO-water nanofluid containing 1 vol% copper oxide nanoparticles was used and single-phase approach was considered for nanofluid flow. The effect of different geometrical para...
متن کاملImprovement of Electromagnetic Forces in a Single-Phase Induction Motor by Providing a New Winding Distribution
Single-phase induction motors have a wide range of domestic and industrial applications. These motors have a squirrel cage rotor and their stator usually has two windings: main and auxiliary. The use of auxiliary winding in the structure of single-phase induction motors creates two unbalance and asymmetric phases. This causes to increase the spatial harmonics of the field in the air gap, and al...
متن کامل