Efficiency Improvement of HIT Solar Cells on p-Type Si Wafers
نویسندگان
چکیده
Single crystal silicon solar cells are still predominant in the market due to the abundance of silicon on earth and their acceptable efficiency. Different solar-cell structures of single crystalline Si have been investigated to boost efficiency; the heterojunction with intrinsic thin layer (HIT) structure is currently the leading technology. The record efficiency values of state-of-the art HIT solar cells have always been based on n-type single-crystalline Si wafers. Improving the efficiency of cells based on p-type single-crystalline Si wafers could provide broader options for the development of HIT solar cells. In this study, we varied the thickness of intrinsic hydrogenated amorphous Si layer to improve the efficiency of HIT solar cells on p-type Si wafers.
منابع مشابه
Heterojunction Solar Cell Efficiency Improvement on Various C-si Substrates by Interface Recombination Modelling
High efficiency Si heterojunction (HJ) solar cells must exhibit low interface recombination, as it limits the cell open circuit voltage (VOC). The study of the interface recombination of various a-Si:H/c-Si lifetime test samples gives insight into the recombination mechanisms, which are found compatible with an amphoteric recombination model [1]. We find that there is a trade-off between reduce...
متن کاملEfficiency Enhancement of Si Solar Cells by Using Nanostructured Single and Double Layer Anti-Reflective Coatings
The effect of single and double-layer anti-reflective coatings on efficiency enhancement of silicon solar cells was investigated. The reflectance of different anti-reflection structures were calculated using the transfer matrix method and then to predict the performance of solar cells coated by these structures, the weighted average reflectance curves were used as an input of a PC1D simulation....
متن کاملScreen-Printed Al-Alloyed Rear Junction Solar Cell Concept Applied to Very Thin (100Î1⁄4m) Large-Area n-Type Si Wafers
Reducing the thickness of crystalline Si wafers processed to solar cells returns two significant benefits. Firstly, processing cost is reduced by saving costand energy-intensive Si material. Secondly, the required diffusion length of minority carriers is smaller, thus, wafers with a smaller carrier lifetime (e.g. due to higher base doping) can be utilized. In this work, the industrially feasibl...
متن کاملRecord high efficiency single-walled carbon nanotube/silicon p-n junction solar cells.
Carrier transport characteristics in high-efficiency single-walled carbon nanotubes (SWNTs)/silicon (Si) hybrid solar cells are presented. The solar cells were fabricated by depositing intrinsic p-type SWNT thin-films on n-type Si wafers without involving any high-temperature process for p-n junction formation. The optimized cells showed a device ideality factor close to unity and a record-high...
متن کاملCalcium contacts to n-type crystalline silicon solar cells
Direct metallization of lightly doped n-type crystalline silicon (c-Si) is known to routinely produce non-Ohmic (rectifying) contact behaviour. This has inhibited the development of n-type c-Si solar cells with partial rear contacts, an increasingly popular cell design for high performance p-type c-Si solar cells. In this contribution we demonstrate that low resistance Ohmic contact to n-type c...
متن کامل