Combustion synthesis in nanostructured reactive systems
نویسندگان
چکیده
http://dx.doi.org/10.1016/j.apt.2015.03.013 0921-8831/ 2015 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved. ⇑ Corresponding authors at: Department of Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, IN 46556, USA. Tel.: +1 574 631 9825 574 631 8366 (A.S. Mukasyan), Surface Engineering Division, Council of Scientific and Industrial Research-National Aerospace Laboratories, Bangalore 560 017, Ka India. Tel.: +91 08
منابع مشابه
Synthesis of nanostructured palladium, palladium oxide and palladium-palladium oxide nanocomposite by the gel combustion method and application as catalyst of hydrogen release
This paper presents a new gel combustion method to synthesize palladium nanoparticles, palladium oxide (PdO) nanoparticles and palladium-palladium oxide nanocomposites. In the proposed method, there are some effective parameters including palladium chloride concentration, polyvinyl alcohol (PVA) concentration, acid concentration, solvent composition and combustion temperature that their values ...
متن کاملCombustion synthesis and nanomaterials
The recent developments and trends in combustion science towards the synthesis of nanomaterials are discussed. Different modifications made to conventional combustion approaches for preparation of nanomaterials are critically analyzed. Special attention is paid to various applications of combustion synthesized nanosized products. 2008 Elsevier Ltd. All rights reserved.
متن کاملNovel Method for Synthesis of Nano-Materials: Combustion of Active Impregnated Layers**
Nanomaterials with characteristic structural dimensions on the order of few nanometers (1–100 nm) attract wide attention owing to their unique properties. They found a variety of applications in different branches of science and industry including catalysis, micro and biotechnologies, energy storage and conversion devices, such as fuel cells. Different techniques have been developed for nanomat...
متن کاملPreparation of Energetic Metastable Nano-Composite Materials by Arrested Reactive Milling M. Schoenitz, T. Ward and E.L. Dreizin
Highly metastable, nano-scale energetic materials were prepared by Arrested Reactive Milling (ARM). When reactive milling is carried out with materials systems suitable for SelfPropagating High Temperature Synthesis (SHS), reaction between the components occurs spontaneously and violently after a certain period of milling. In this research, metastable nanocomposites with high energy density, we...
متن کاملSynthesis of Titanium Carbide by the Combustion of TiO2-2Mg-C and 3TiO2-4Al-3C Systems in a Tubular Furnace
The combustion process of TiO2- 2Mg- C and 3TiO2-4Al-3C systems in a tubular furnace was investigated. TiC has been synthesized by the magnesiothermic reaction from a mixture of compacted powders of TiO2, Mg and charcoal as starting materials in the presence and absence of NaCl. The effects of temperature, pressure, and the stoichiometry ratio in the reactio...
متن کامل