Working Modes and Aspects in Fully-Parallel Manipulator
نویسندگان
چکیده
The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [1], and redefined for parallel manipulators with only one inverse kinematic solution in [2], is redefined for general fully parallel manipulators. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the “inverse kinematics” and the “direct kinematics” matrices. The study of these matrices allow to respectively define the parallel and the serial singularities. The notion of working modes is introduced to separate inverse kinematic solutions. Thus, we can find out domains of the workspace and the joint space exempt of singularity. Application of this study is the moveability analysis in the workspace of the manipulator as well as path-planing and control. This study is illustrated in this paper with a RR-RRR planar parallel manipulator.
منابع مشابه
Working Modes and Aspects in Fully Parallel Manipulators
The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [1], and redefined for parallel manipula...
متن کاملThe Kinematic Analysis of a Symmetrical Three-Degree-of-Freedom Planar Parallel Manipulator
1 IRCCyN: UMR CNRS 6596, Ecole Centrale de Nantes, Université de Nantes, Ecole des Mines de Nantes Abstract— Presented in this paper is the kinematic analysis of a symmetrical three-degree-of-freedom planar parallel manipulator. In opposite to serial manipulators, parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. This pr...
متن کامل3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملWorkspace computation in parallel manipulators with three translational degrees of freedom
One of the weak aspects of the parallel robots is ratio between the workspace and the dimension of the mechanical structure, if compared with the serial one. Hence the shape of the workspace of a parallel manipulator is one of the most important aspects to reflect its working capacity. This paper introduces two innovative methods to analyze the workspace of some family of parallel robots, with ...
متن کاملForward Position Kinematics of a Parallel Manipulator with New Architecture
The forward position kinematics (FPK) of a parallel manipulator with new architecture supposed to be used as a moving mechanism in a flight simulator project is discussed in this paper. The closed form solution for the FPK problem of the manipulator is first determined. It has, then, been shown that there are at most 24 solutions for FPK problem. This result has been verified by using other tec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/0707.2006 شماره
صفحات -
تاریخ انتشار 1998