A Study on Fracture Behavior of Brazed Multicrystalline CBN Abrasive Grains During Grinding
نویسندگان
چکیده
This paper analyses the fracture behavior of the brazed BCBN grain by comparison with brazed PCBN grain through grinding test of Nickel-based superalloy. The self-sharpening effect is created by timing micro-fracture behavior for BCBN abrasive grains, but by macro-fracture behavior for PCBN abrasive grains. During grinding with brazed BCBN abrasive grains, the material is removed together with the consumption of the CBN particle. While for PCBN ones, the fracture pattern consists of the intercrystalline fracture and the intergranular bond fracture. The service life of brazed BCBN grinding tool is around 1.67 times longer than that of PCBN one, furthermore the material removal of PCBN grinding tool is just about 73% of that of BCBN grinding tool in this investigation.
منابع مشابه
Preparation and Characterization of Ni Spines Grown on the Surface of Cubic Boron Nitride Grains by Electroplating Method
Cubic boron nitride (cBN) is widely applied in cutting and grinding tools. cBN grains plated by pure Ni and Ni/SiC composite were produced under the same conditions from an additive-free nickel Watts type bath. The processed electroplating products were characterized by the techniques of scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermoanalysis (TG-DTA). Due to the presence...
متن کاملMicro Cutting Simulation of Abrasive Grains in the Grinding Process
In the current work we present approach to study the mechanism of the cutting of abrasive grains in the grinding wheel using finite element analysis (FEA). The simulation process is done by separating two abrasive grains from the grinding wheels and the microprocess of material removal in the case of surface grinding is simulated. Modelling was done on the workpiece steel S-7 and material grain...
متن کاملElaboration and Optimization of Pellets Used for Precise Glass Grinding
In this work, grinding or microcutting tools in the form of pellets were manufactured using a bounded alumina abrasive grains. The bound used is a vitreous material containing quartz feldspars, kaolinite and a quantity of hematite. The pellets were used in glass grinding process to replace the free abrasive grains lapping process. The study of the elaborated pellets were done to define their ef...
متن کاملDisclaimer of Quality Pages Are Missing from the Original Document. Pages 35 and 102 Missing from Original the Attritious and Fracture Wear of Grinding Wheels Thesis Supervisor Wear of Grinding Wheels
THE ATTRITIOUS AND FRACTURE WEAR OF GRINDING WHEELS by Stephen Malkin Submitted to the Department of Mechanical Engineering February 1968, in partial fulfillment of the requirements for the degree of Doctor of Science A detailed investigation is made of the nature and extent-of grinding wheel wear in finish grinding. The wear is broadly classified as either attritious or fracture wear. Attritio...
متن کاملElucidating Grinding Mechanism by Theoretical and Experimental Investigations
Grinding is one of the essential manufacturing processes for producing brittle or hard materials-based precision parts (e.g., optical lenses). In grinding, a grinding wheel removes the desired amount of material by passing the same area on the workpiece surface multiple times. How the topography of a workpiece surface evolves with these passes is thus an important research issue, which has not ...
متن کامل