MEMS motion sensor: three-axis digital output gyroscope

MEMS motion sensor: three-axis digital output gyroscope

• Three selectable full scales (250/500/2000 dps) • I2C/SPI digital output interface • 16 bit-rate value data output • 8-bit temperature data output • Two digital output lines (interrupt and data ready) • Integrated lowand high-pass filters with userselectable bandwidth • Wide supply voltage: 2.4 V to 3.6 V • Low voltage-compatible IOs (1.8 V) • Embedded power-down and sleep mode • Embedded tem...

A New MEMS Gyroscope Used for Single-Channel Damping

The silicon micromechanical gyroscope, which will be introduced in this paper, represents a novel MEMS gyroscope concept. It is used for the damping of a single-channel control system of rotating aircraft. It differs from common MEMS gyroscopes in that does not have a drive structure, itself, and only has a sense structure. It is installed on a rotating aircraft, and utilizes the aircraft spin ...

Design and performance test of digital rebalance loop for MEMS gyroscope

In this paper, a digital rebalance loop for MEMS gyroscope is designed and its performance test is performed. First, the system model of MEMS gyroscope is established by dynamic analysis. Then, the digital rebalance loop is designed using modern control technique. The performance of the digital rebalance loop is compared with that of conventional PID rebalance loop. Through frequency response a...

MEMS motion sensor 3-axis - ±2g/±8g smart digital output “piccolo” accelerometer

MEMS digital output motion sensor ultra low-power high performance three-axis “nano” accelerometer

■ Wide supply voltage, 1.71 V to 3.6 V ■ Independent IOs supply (1.8 V) and supply voltage compatible ■ Ultra low-power consumption ■ ±2g/±4g/±6g/±8g/±16g dynamically selectable full-scale ■ I2C/SPI digital output interface ■ 16-bit data output ■ Programmable embedded state machines ■ Embedded temperature sensor ■ Embedded self-test ■ Embedded FIFO ■ 10000 g high shock survivability ■ ECOPACK® ...