Influence of Sprue Design on Soundness of Rpd Casting
نویسنده
چکیده
منابع مشابه
The Effects of Gating Systems on the Soundness of Lost Foam Casting (LFC) Process of Al-Si Alloy (A.413.0)
The effects of gating systems, number of runner, and their locations, in the Lost Foam Casting (LFC) of Aluminum alloy (A.413.0) were investigated. Six different gating systems, with one or two running systems were designed. X-ray radiography and the three axis-bending tests have been employed to evaluate the casting soundness and quality. The results revealed that gating systems have a major e...
متن کاملNumerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE)
Design and manufacturing technology of high pressure multistage pumps which are commonly utilized in oil and gas industries, used to be imported from foreign companies. Due to international sanctions against I. R. Iran, it started to be designed and launched domestically. Nowadays all production lines including design, manufacturing and testing of these pumps have been performed by Iranian expe...
متن کاملThe Effect of Bridge Orientation in Casting Machine on the Castability and Quality of Base Metal Castings
Introduction: The aim of this study was to evaluate the effect of bridge orientation in casting machine on castability and quality of base metal castings. Methods: Three groups of patterns with different direction and lengths in casting machine were casted and then studied qualitatively and quantitatively using mean and standard deviation in table of frequency. Results: Larger nodules and poros...
متن کاملEnhancement of a titanium denture frame model: mold temperature and spruing factors.
This study evaluated the sensitivity of an experimental model to mold temperature using a two-chamber casting machine and its recommended investment (Exp. 1), and the effect of sprue diameter and length using a one-chamber casting machine and its recommended investment (Exp. 2). Experimental patterns were cast from commercially pure titanium and percentage casting success obtained. Mold tempera...
متن کاملساخت یک نرمافزار رایانهای جهت طراحی پروتزهای پارسیل متحرک
Background and Aim: Designing removable partial dentures is one of the most important phases of prosthetic treatments. Computer can be used to facilitate and increase accuracy of removable partial denture design. The aim of this study was to develop a software for removable partial denture design.Materials and Methods: A questionnaire (discussed in part I) and major textbooks, were used to dete...
متن کامل