A method to improve passive fit of frameworks on implant-supported prostheses: an in vivo study.
نویسندگان
چکیده
PURPOSE A die stone jig was evaluated as to its ability to clinically verify the position of the abutment replicas on the master cast. MATERIALS AND METHODS A clinical evaluation was made on 58 edentulous arches necessitating rehabilitation with fixed partial dentures. Any broken jigs detected were replaced with a new set of jigs and clinically retested. Data were statistically confirmed. RESULTS Fifty-five percent of the 58 jigs broke, with a 95% confidence interval (CI) of 42.5 to 67.3; after replacement, there were no breakages (95% CI: 0 to 6.2). CONCLUSIONS The jig detected misfits in clinical trials, according to the parameters defined in the literature.
منابع مشابه
Fit Analysis of Different Framework Fabrication Techniques for Implant-Supported Partial Prostheses.
PURPOSE This study evaluated the vertical misfit of implant-supported frameworks made using different techniques to obtain passive fit. MATERIALS AND METHODS Thirty three-unit fixed partial dentures were fabricated in cobalt-chromium alloy (n = 10) using three fabrication methods: one-piece casting, framework cemented on prepared abutments, and laser welding. The vertical misfit between the f...
متن کاملDimensional changes of three-unit implant-supported zirconia frameworks from scanning to sintering
Background and Aims: Passive fitness of implant frameworks are important factors for long-term success of dental implant restorations. The aim of this in vitro study was to evaluate the dimensional changes of implant supported zirconia frameworks fabricated by Zirkonzahn CAD/CAM system during fabrication stages. Materials and Methods: The master model of 3-unit FDP was made of two implant abut...
متن کاملThe significance of passive framework fit in implant prosthodontics: current status.
The clinical and laboratory procedures employed for framework fabrication are inadequate to provide an absolute passive fit for implant-supported fixed superstructures. Although some prosthetic complications are attributed to the lack of passive fit, its effect on implant success is questionable. Nevertheless, the clinical results of increasing applications of advanced technology to improve fra...
متن کاملمقایسه گپ مارژینال فریم ورکهای زیرکونیایی متکی بر ایمپلنت دو سیستم CAD/CAM
Background and Aims: Marginal accuracy is a crucial factor influencing the clinical long-term reliability of implant-supported fixed dental prostheses (FDPs). The aim of this in vitro study was to evaluate the marginal fit of three-unit zirconia bridge frameworks fabricated using two different computer-aided design (CAD)/ computer-aided manufacturing (CAM) systems (AmannGirrbach and Zirkonzahn...
متن کاملEffect of Three Types of Temporary Luting Cements and Abutment Surface Sandblasting on Retentive Strength of Implant-Supported Fixed Prostheses
Background and Aim: Achieving appropriate retention and easy retrieva bility at the same time is challenging in implant-supported fixed par tial dentures (FPDs). Researchers have always been in search of a temporary cement to improve the retentive strength. The aim of this in vitro study was to evaluate the effect of three different temporary ce ments and sandblasting of the abutment surface on...
متن کاملمقایسه اثر مواد مختلف سازنده ساختار فلزی روکش بر توزیع تنش پیرامون ایمپلنت با آنالیز اجزاء محدود سه بعدی
Objectives: Despite the high success rate, implant-supported prostheses fail in some cases. Control of the applied forces is an important factor determining the success or failure of implants. Complete understanding of the biomechanical principles in implant-supported prostheses is necessary for offering an appropriate custom-made treatment plan for each patient and reducing the risk of functio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The International journal of prosthodontics
دوره 26 6 شماره
صفحات -
تاریخ انتشار 2013