Combining a Detailed Building Energy Model with a Physically-Based Urban Canopy Model
نویسندگان
چکیده
A scheme that couples a detailed building energy model, EnergyPlus, and an urban canopy model, the Town Energy Balance (TEB), is presented. Both models are well accepted and evaluated within their individual scientific communities. The coupled scheme proposes a more realistic representation of buildings and heating, ventilation and air-conditioning (HVAC) systems, which allows a broader analysis of the two-way interactions between the energy performance of buildings and the urban climate around the buildings. The scheme can be used to evaluate the building energy models that are being developed within the urban climate community. In this study, the coupled scheme is evaluated using measurements conducted over the dense urban centre of Toulouse, France. The comparison includes electricity and natural gas energy consumption of buildings, building façade temperatures, and urban canyon air temperatures. The coupled scheme is then used to analyze the effect of different building and HVAC system configurations on building energy consumption, waste heat released from HVAC systems, and outdoor air temperatures for the case study of Toulouse. Three different energy efficiency strategies are analyzed: shading devices, economizers, and heat recovery.
منابع مشابه
Evaluation of building energy use: from the urban to the building scale
A 1-D canopy interface model (CIM) has been developed recently and integrated in the meso-scale meteorological WRF v3.5 model in order to improve the surface representation. One of the objectives of such a model is to prepare for the coupling of micro-scale models with meso-scale models so as to improve building energy consumption estimates at the urban scale as well as improve meteorological v...
متن کاملIntegrated canopy, building energy and radiosity model for 3D urban design
We present an integrated, three dimensional, model of urban canopy, building energy and radiosity, for early stage urban designs and test it on four urban morphologies. All sub-models share a common descriptions of the urban morphology, similar to 3D urban design master plans and have simple parameters. The canopy model is a multilayer model, with a new discrete layer approach that does not rel...
متن کاملImplementation of Energy Fluxes in Eulag with a New 3d Shadow Model
The last generation of the mesoscale meteorological model try to incorporate urban characteristics, like as Urban Canopy Model (UCM) as a module added to the mesoscale meteorological model WRF (Weather & Research Forecasting system) (NCAR and others). The UCM approach is a good initial and ideal approach to develop micro urban meteorological simulations over urban domains. However, the real urb...
متن کاملApplication of a sensor network to study the energy budget in urban canopies
We adapt a physically-based single-layer urban canopy model (UCM) to study the energy budget in urban areas. The energy budget scheme in this study is similar to the scheme implemented in the WRF-NOAH urban canopy model, but it is decoupled from the Weather Research and Forecasting (WRF) model. Simulations are carried out to quantify the sensitivity of the model to each atmospheric and surface ...
متن کاملAN Improved UTD Based Model For The Multiple Building Diffraction Of Plane Waves In Urban Environments By Using Higher Order Diffraction Coeficients
This paper describes an improved model for multiple building diffraction modeling based on the uniform theory of diffraction (UTD). A well-known problem in conventional uniform theory of diffraction (CUTD) is multiple-edge transition zone diffraction. Here, higher order diffracted fields are used in order to improve the result; hence, we use higher order diffraction coefficients to improve a hy...
متن کامل