Hot embossing of micro-lens array on bulk metallic glass
نویسندگان
چکیده
Hot embossing of micro-lens array on bulk metallic glass C.T. Pan a,∗, T.T. Wu a, M.F. Chen a, Y.C. Chang b, C.J. Lee b, J.C. Huang b a Department of Mechanical and Electro-Mechanical Engineering, and Center for Nanoscience & Nanotechnology, National Sun Yat-Sen University, Kaoshiung 804, Taiwan, ROC b Institute of Materials Science & Engineering, Center for Nanoscience and Nanotechnology, National Sun Yat-Sen University, Kaohsiung 804, Taiwan, ROC
منابع مشابه
Development of a multi-layer microelectrofluidic platform
We report on the development of process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were conducted to look at the effects of load applied, embossing temperature and embossing time on the fidelity of line arrays representing micro channels. The results reveal...
متن کاملProcess Issues for a Multi-Layer Microelectrofluidic Platform
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were conducted to look at the effects of load applied, embossing temperature and embossing time on the fidelity of line arrays representing micro channels. The results r...
متن کاملManufacturing of Devices for the Parallel Precision Alignment of Multiple Micro Components
Micro components are available in a variety of shapes typically sizing from 1 mm down to 0.01 mm. Their mass production is quite common using state of the art production technology. Micro spheres for example, are on the one hand available in lot sizes up to some thousands in a constant quality within micron accuracy [1]. On the other hand they are quite commonly provided as bulk material with d...
متن کاملStudies of Polymer Deformation and Recovery in Hot Embossing
In large area micro hot embossing, process temperature plays a critical role in both the local fidelity of microstructure formation and global uniformity. Micro embossing at the lowest temperature with acceptable fidelity can improve the global flatness after demolding. This paper focuses on polymer deformation and recovery in micro embossing when the process temperatures are below its glass tr...
متن کاملTuning apparent friction coefficient by controlled patterning bulk metallic glasses surfaces
Micro-honeycomb structures with various pitches between adjacent cells were hot-embossed on Zr35Ti30Cu8.25Be26.75 bulk metallic glass surface. The effect of pitch geometry on the frictional behavior of metallic glass surface was systematically investigated. The results revealed that all textured metallic glass surfaces show a reduction in friction coefficient compared to smooth surface. More in...
متن کامل