The Characterisation and Finite-Element Analysis of a Polymer under Hot Pressing
نویسندگان
چکیده
Finite-element simulation of the hot pressing process has been performed using ABAQUS. The viscoelastic polymer (polymethyl methacrylate) used in this study has mechanical properties that depend on the temperature and working pressure. Based on the nonlinear viscoelastic model, the polymer material behaviour is simulated successfully with the data obtained from material tests. Simulation results conform to related experiments, indicating that the approach can accurately predict pressure distribution within a polymer hot pressing.
منابع مشابه
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing
In the present study, the microstructural changes of a Nickel based superalloy Nimonic80A during a non-isothermal deformation were studied. Therefore, microstructure evolutionduring hot side pressing test was predicted with combined methods of finite element analysis andprocessing map of the material. The predicted results were validated through experimentalmicrostructural studies. The results ...
متن کاملA Theoretical and Practical Study of Cracking of an Aluminium Alloy During Side Pressing Using a Finite - Element Analysis
Elastic-plastic finite-element analysis applied to metalforming allows the real macroscopic properties of the workpiece to be incorporated. This paper presents the results of an experimental study of the initiation of cracking in side-pressing of a heat-treated aluminium alloy (Duralloy 2014). Using an F. E. analysis, these are related to various fracture criteria. It is found that the criterio...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کامل3D finite element study of temperature variations during equal channel angular pressing
Equal channel angular pressing is the most promising method of severe plastic deformation with the capability of producing ultrafine grained materials. These materials exhibit improved mechanical and physical properties compared with their coarse grained counter parts.The temperature variation in the sample during ECA-pressing is a key factor determining the final microstructure and mechanical ...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کامل