Determination ofresearch reactor fuel burnup
ثبت نشده
چکیده
منابع مشابه
Methodologies for an improved prediction of the isotopic content in high burnup samples. Application to VandellÃ3s-II reactor core
Fuel cycles are designed with the aim of obtaining the highest amount of energy possible. Since higher burnup values are reached, it is necessary to improve our disposal designs, traditionally based on the conservative assumption that they contain fresh fuel. The criticality calculations involved must consider burnup by making the most of the experimental and computational capabilities develope...
متن کاملSerpent-2 Reactor Model Validation at the Vienna Triga Mark Ii Reactor
The Vienna TRIGA Mark II reactor was modelled by means of the Serpent-2 Monte Carlo burnup calculation code. The purpose of the modelling is the determination of core critical parameters and of nuclear fuel composition time evolution. This paper presents the Serpent-2 reactor model validation process carried out during the last year. Taking into account the irradiation history, the fuel composi...
متن کاملNeutronic Design of the Pb-ahtr
This study (1) investigates the neutronic characteristics of the Pebble Bed Advanced High Temperature Reactor (PB-AHTR); (2) compares the PB-AHTR neutronic performance against those of the alternative design options of He-cooled high temperature reactors using either pebble (PBMR) or prismatic (VHTR) fuel and against a liquid-salt cooled design version of the latter (LS-VHTR); (3) studies the p...
متن کاملThe importance of input interactions in the uncertainty and sensitivity analysis of nuclear fuel behavior
The propagation of uncertainties in a PWR fuel rod under steady-state irradiation is analyzed by computational means. A hypothetical steady-state scenario of the Three Mile Island 1 reactor fuel rod is modeled with the fuel performance FRAPCON, using realistic input uncertainties for the fabrication and model parameters, boundary conditions and material properties. The uncertainty and sensitivi...
متن کاملActinide Burning in a Standard Pressurized Water Reactor
This study investigates actinide burning in a standard lattice PWR. It assumes that after the first loading of depleted uranium, plutonium and minor actinides, only the fission products are removed and only depleted uranium and the plutonium/minor actinide mixture are added. The relative concentrations of plutonium and minor actinide feed are always maintained the same as PWR discharge fuel aft...
متن کامل