Title of dissertation : Effect of Aggregate Inhomogeneity on Mechanical Properties of Asphalt Mixtures
نویسندگان
چکیده
Title of dissertation: Effect of Aggregate Inhomogeneity on Mechanical Properties of Asphalt Mixtures Haleh Azari, Doctor of Philosophy, 2005 Dissertation directed by: Professor Richard McCuen Department of Civil and Environmental Engineering Vertical and radial inhomogeneity of asphalt mixture components in laboratoryfabricated specimens have been of concern in asphalt mixture testing because of their potential effect on the mechanical response of the materials. Two important questions needed to be answered. First, can the existence of inhomogeneity in laboratory specimens definitively be distinguished? Second, if inhomogeneity exists, what effect would it have on the performance of asphalt materials? Several new indices were developed to assess the extent of inhomogeneity. The level of accuracy of the suggested indices was evaluated by testing virtual and real specimens. Computer simulation was used to fabricate virtual specimens with various aggregate structures and to test the indices. The statistical power of the tests and the critical values for tests on the proposed indices were computed. The computed power of the tests indicated that the proposed tests are accurate for the measurement of both vertical and radial inhomogeneity. Actual specimens, both homogeneous and inhomogeneous, were fabricated to validate the simulation results. The indices of homogeneity were computed from the x-ray computed tomography images of the specimens. Among the proposed indices, the z index on frequency proportion most clearly distinguished between the homogeneous and inhomogeneous specimens. The specimens were then subjected to mechanical testing to examine the effect of inhomogeneity on the mechanical performance of the material. The effect of vertical and radial inhomogeneity was examined on compressive and shear properties of the mixtures, respectively. Statistical analyses on the results indicated that the compressive modulus (E*) of homogeneous specimens were slightly but not significantly higher than those of vertically inhomogeneous specimens, and the shear modulus (G*) of homogeneous specimens were significantly lower than those of radially inhomogeneous specimens. A correlation analysis indicated insignificant correlation between the compressive properties and the index of vertical homogeneity but significant correlation between the shear properties and the index of radial homogeneity. The asphalt mixture was not sensitive to extreme level of vertical inhomogeneity when loaded axially but was responsive to radial inhomogeneity when loaded in shear. EFFECT OF AGGREGATE INHOMOGENEITY ON MECHANICAL PROPERTIES OF ASPHALT MIXTURES
منابع مشابه
Investigating the Effect of Using Cross-Linked Polyethylene Waste as Fine Aggregate on Mechanical Properties of Hot Mix Asphalt
Cross-linked polyethylene (XLPE) is an appropriate insulating material for high-voltage cables which has been widely used as electrical cable coating. In this study, Crushed XLPE wastes with different volume percentages (25, 50, and 75%) were used in hot mix asphalt (HMA) as a substitute for fine aggregates remained on sieve no. 8 whose size varies from 1.18 to 2.36 mm. The dynamic stiffness (i...
متن کاملEffects of Compactor Types on Aggregate Orientation of Asphalt Mixtures
More than 90% of Malaysian roads are constructed using asphaltic concrete. However, previous investigations of asphaltic concrete have mainly concentrated on the macroscopic properties of the composite materials based on the assumption that the mixtures are homogeneous and isotropic. This paper applies a digital image processing technique to compare the orientations of coarse aggregate particle...
متن کاملIdentification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures
Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...
متن کاملEvaluation of the Mechanical Properties of the cement treated Cold-in-Place Recycled Asphalt Mixtures
Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...
متن کاملEvaluating the Semi-Circular Bending Test for HMA Mixtures
Semi-Circular Bending (SCB) Test is a fast and accurate three-point bending test, which was originally used in rock mechanics. SCB test is going to be an accepted test method for asphalt concrete pavements. Different asphalt-mixture property-values such as tensile strength, stress intensity factor and fatigue can be obtained by this test. In this study, static and dynamic tests including SCB te...
متن کامل