Mass Transfer Within the Location Where Micro Electroplating Takes Place
نویسندگان
چکیده
منابع مشابه
Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition
Water cooling by ambient takes place with two mechanisms of heat and mass transfer. Using packings at wet cooling towers has disadvantages such as obstruction, reduction of life expectancy and production of algae and fungi. In shower cooling towers types of towers packings are completely removed and water intake is in direct contact and heat transfer takes place in two ways of latent and sensib...
متن کاملStudy on Mass Transfer Enhancement in a Gas-Liquid System Using Nanomaterials
The main objective of this paper is to examine the effect of nanomaterials on mass transfer coefficient in bubble type absorption of carbon dioxide by experiment. The absorption process is carried out in a bubble column and in room temperature. Mass transfer coefficient, saturated concentration of CO2, and gas holdup are determined in this system. The kinds of nanomaterials, the concentrations ...
متن کاملThree-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell
In this article three dimensional modeling of a planar solid oxide fuel cell (SOFC) was investigated. The main objective was to attain the optimized cell operation. SOFC operation simulation involves a large number of parameters, complicated equations, (mostly partial differential equations), and a sophisticated simulation technique; hence, a finite element method (FEM) multiphysics approach ...
متن کاملStructure and evolution of low mass W UMa type systems
The structure and evolution of low-mass W UMa type contact binaries are discussed by employing Eggleton’s stellar evolution code (Eggleton 1971, 1972, 1973). Assuming that these systems completely satisfy Roche geometry, for contact binaries with every kind of mass ratios (0.02∼1.0), we calculate the relative radii (R1,2/A, where R1,2 are the radii of both stars, and A the orbital separation) o...
متن کاملDetermination of Principal Permeability Directions in Reservoir Rocks from Micro-CT Data
The routine measurement of direction-dependent reservoir rock properties like permeability often takes place along the axial direction of core samples. As permeability is a tensor property of porous materials, it should be fully described by a tensor matrix or by three main permeabilities in principal directions. Due to compaction, cementation, and other lithification processes, which take plac...
متن کامل