The Design and Control of a
نویسنده
چکیده
We describe the design, construction and control of a quadruped robot which walks on uneven terrain. A control system which produces a statically stable gait has been implemented; results showing a straight and turning gait are presented. The control of quadruped robots poses interesting challenges due to a small stability margin (when compared to hexapods for example). For this reason most implemented systems for outdoor walking on uneven terrain have been hexapods. The system described here has the added virtue of using very few inexpensive sensors and actuators. One of the aims of this work is to build a reduced complexity (low power, low mass and direct drive) walking robot for statically stable walking. The other aim is to compare the performance of this robot with a wheeled robot roughly the same size and weight. In this paper we report on progress towards the rst of these two goals using a traverse across an obstacle eld as an example.
منابع مشابه
Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis
Control charts are the most important tools of statistical process control used to discriminate between assignable and common causes of variation and to improve the quality of a process. To design a control chart, three parameters including sample size, sampling interval, and control limits should be determined. The objectives are hourly expected cost, in-control average run length, power of th...
متن کاملA Numerical Design Technique for a Relay - Type Feedback Control System
An efficient numerical method for the design and synthesis of compensator for a relay type control system is developed and discussed. Previous works based on the interactive graphic method are reviewed and it is shown that the combination of the trequency and time domain numerical techniques provide a powerful tool in design of a wide class of relay control systems. An example is presented to d...
متن کاملEconomic Statistical Design of a Three-Level Control Chart with VSI Scheme
Traditionally, the statistical quality control techniques utilize either an attributes or variables product quality measure. Recently, some methods such as three-level control chart have been developed for monitoring multi attribute processes. Control chart usually has three design parameters: the sample size (n), the sampling interval (h) and the control limit coefficient (k).The design parame...
متن کاملDesign of an Intelligent Controller for Station Keeping, Attitude Control, and Path Tracking of a Quadrotor Using Recursive Neural Networks
During recent years there has been growing interest in unmanned aerial vehicles (UAVs). Moreover, the necessity to control and navigate these vehicles has attracted much attention from researchers in this field. This is mostly due to the fact that the interactions between turbulent airflows apply complex aerodynamic forces to the system. Since the dynamics of a quadrotor are non-linear and the ...
متن کاملBi-objective Economic statistical design of the joint Xbar and S charts incorporating Taguchi loss function
In this research, we propose a bi-objective model for the economic-statistical design of the X-bar and S control charts. The model minimizes out-of-control average time to signal as well as minimizing mean hourly loss-cost where it incorporates the Taguchi loss function. Statistical constraint is considered in the model to achieve desired in-control time to signal. A non-dominated sort...
متن کاملEconomic- Statistical design of T2 control chart with the VSSC scheme
T2 control charts are used to monitor a process when more than one quality variable associated with process is being observed. Recent studies have shown that using variable sample size (VSS) schemes result in charts with more statistical power when detecting small to moderate shifts in the process mean vector. This paper presents an economic- statistical design of T2 control charts with variabl...
متن کامل